Results 1 to 4 of 4

Thread: Problems with starting the plane

  1. #1

    Default Problems with starting the plane

    When I start the plane it is going extremely to the left.
    It's normal with a Cessna but this is so extreme that I can not correct it.
    What is the reason. Am I doing something wrong.

    Ad van Beek

  2. #2
    Join Date
    May 2012
    Location
    Swindon UK
    Posts
    530

    Default

    I am new to X Plane 11 and this seems to be a bit of an issue - there is no obvious option to tone down the P factor as you have in MSFS. I've since switched to the jets but that brings a whole other list of little quirks to deal with!
    Vern.

  3. #3
    Join Date
    Feb 2013
    Location
    Maple Ontario Canada
    Posts
    28

    Unhappy c172

    Controlling the aircraft in X Plane is a pain are you using a yoke or a joy stick ? Check the response curves it the set up.

    Avitec

    X Plane the challenge

  4. #4
    Join Date
    Dec 2020
    Location
    Olympia Washington
    Posts
    63

    Default

    These may or may not help. Get ahead of the plane by applying some right rudder before you release the brakes. Release the brake with the power in idle then run it up slowly and smoothly while concentrating on holding the right rudder on. Don't let it jump sideways like a scared horse. You won't need to touch the left rudder pedal. If it takes off to the right just lighten up a hair and let the torque pull you back to the center. Try centering the yoke/stick then take your hands off so you won't forget that you are steering with just your feet and grab it like a steering wheel. I only hit full power just before rotation then hold it level and fly out the rest of the runway to gain energy. A Cessna will take off in half the length of most paved runways. The controls are much more sensitive to tiny movements than a real plane or nobody would ever get their ppl. I crashed the first two times and took off by a hair on the third try. It just takes thinking through what's going on and practicing until you get it. Of course all flight controls are different. At the moment I'm using a joystick and Thrustmaster foot pedals which don't seem to have any adjustment. The joystick was the best thing available but now some yokes are coming back in stock. Will probably order a Honeywell Alpha yoke tomorrow but it still doesn't solve the rudder issue.

    In order to get a feel for the plane you might want to generate some flights already in the air which is more like a real flying lesson. You aren't expected to take off and land by yourself on the first fight but you do begin actually flying the plane once you are in the air along with the instructor right from the start.

    Hang in there you'll get it.
    Liquid cooled, Intel i7-10700K, NVIDIA 3070, G.Skill Ram 32 GB, 2TB M.2 NVME. Z490 MB Loads of Christmas lights.

Similar Threads

  1. Baron 58: Engine starting problems from cold and dark situation
    By DreamFleet1 in forum FAQ - Frequently Asked Questions - DreamFleet General Aviation & 737-400 Products
    Replies: 0
    Last Post: 09-21-2005, 07:11 PM
  2. Engine Starting Problems
    By N317X in forum FS2002
    Replies: 3
    Last Post: 11-29-2004, 12:29 PM
  3. Problems Starting the FSD Cheyenne 400
    By TomG in forum FS2004
    Replies: 3
    Last Post: 11-14-2004, 12:05 PM
  4. Replies: 9
    Last Post: 04-07-2004, 02:05 PM
  5. Problems starting Beagle Basset
    By ndkeh01 in forum FS2002
    Replies: 1
    Last Post: 01-16-2002, 04:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •