crof_s Posted August 19, 2017 Share Posted August 19, 2017 I am getting really frustrated. I feel like I have tried everything. How do I make the thing move?! I can't even seem to taxi! Can somebody walk me through the steps? Thanks. Link to comment Share on other sites More sharing options...
berlopez Posted August 19, 2017 Share Posted August 19, 2017 First try Ctrl+F4 Check Fuel Pumps are on ( Throttle panel) Once engines are running, Pushback and or taxi. berlopez Link to comment Share on other sites More sharing options...
crof_s Posted August 19, 2017 Author Share Posted August 19, 2017 First try Ctrl+F4 Check Fuel Pumps are on ( Throttle panel) Once engines are running, Pushback and or taxi. berlopez Can't see any fuel pump buttons on the throttle panel. On the overhead I have switched on what I can though and no luck. Ok let me talk you through it..... When I start my new 'free flight' with the airbus, if I quickly go to the 'overhead panel' view I am faced with this saying there are faults. (sorry for the Dropbox links. I just didn't want to post massive pictures here!) https://www.dropbox.com/s/6bcn21a0sedfapd/4.jpg?dl=0 These lights go out after a couple of seconds and this is what I am left with what is in the following pictures. Can't seem to get moving. https://www.dropbox.com/s/i3j5nauevmu41l7/1.jpg?dl=0 https://www.dropbox.com/s/cihri3zkg89w1kc/2.jpg?dl=0 https://www.dropbox.com/s/4tdvi20er5maaxg/3.jpg?dl=0 Thank you for your help in advance. Link to comment Share on other sites More sharing options...
il88pp Posted August 19, 2017 Share Posted August 19, 2017 In image 4.jpg the fuell pumps indicate "Fault" (orange letters, top middle). (but in 2.jpg all fault lights are off. So that seems fine.) The engine starters seem to be on the lower right. Above the "Wipers" switch. (Difficult to read the text with the buttons in the image.) But... this is not the default A321. It looks like some addon. Perhaps the Aerosoft Airbus A321? If it's that plane... Read The Manual. You probably won't get it flying without reading that manual. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
darrenwilliams Posted August 20, 2017 Share Posted August 20, 2017 If it is the Aerosoft Airbus, you need to fire up the APU to get the engines to start. Only other thing I can suggest is below the engine start levers there is a rocker switch. This needs to be in the 'CRANK' position before you flip up the start levers Link to comment Share on other sites More sharing options...
darrenwilliams Posted August 25, 2017 Share Posted August 25, 2017 If you look at the last screenshot, the engines are already running. Btw, in the position 'crank' the engines don't start, at least they don't on the real A321! My bad, I meant IGN START Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.