tom_3123 Posted January 29, 2017 Share Posted January 29, 2017 Hello, I enjoy The Alabeo and Carenado AC, however one thing bothers me and that is I have to go in to the windows manager and manually change the VC Windows and Instrument Reflections setting each time I fly the AC. Is there a way to permanently change them? I prefer them off by default. If there is no way to make this change then is there a macro file of some other work around that I could use? Regards, Tom Link to comment Share on other sites More sharing options...
Daniel.T Posted January 29, 2017 Share Posted January 29, 2017 Tom, what sim are you flying; FSX, P3d or X Plane ? Do you use "graphic tuner" as DXfixer and NVInspector ? As you, I enjoy and almost only flies Carenado's GA. But, as many simmers, I also like the glare, reflection and shadow effects we can get in cockpit. We spend so much time tuning the graphics to have it "as real it can get"... Dan i7-4790K @4400 on Gigabyte Z97X (16gb), GeForce GTX 970 OC, Corsair Spec case Win7 Ult(64) on Samsung850 SSD(256), FSX+Accell on Samsung850 SSD(256), Track IR5 Saitek yoke/rudder radio/multi/switch panels, Logitech G13, GMap on Samsung tab Link to comment Share on other sites More sharing options...
tom_3123 Posted January 29, 2017 Author Share Posted January 29, 2017 Daniel, Thanks, I am using FSX Boxed with the Accelerator add nothing else.and although some may like the effects I don't, No disrespect to those who do but I find them annoying to look at. At any rate what my original question was can they be turned off permanently so i dont have to go in and set them to my personal tastes... Thanks again for the reply Link to comment Share on other sites More sharing options...
tom_3123 Posted February 3, 2017 Author Share Posted February 3, 2017 357 people looked at this post and I got one reply, so am I to understand then there no fix to setting the VC Windows and Instrument Reflections to off permanently? Thanks all who took the time to read it... Tom Link to comment Share on other sites More sharing options...
Talon90 Posted February 3, 2017 Share Posted February 3, 2017 357 people looked at this post and I got one reply, so am I to understand then there no fix to setting the VC Windows and Instrument Reflections to off permanently? Thanks all who took the time to read it... Tom I suspect that the reason you didn't really get any traction is that many (if not most) of us prefer the realism aspects of the sim and for me, that includes the cockpit shadows and reflections. Certainly your choice but not something that I would have ever endeavored to turn off. Perhaps you could create a saved flight or a new default flight with the reflections turned off and simply start there each time. FSX tends to save last aircraft state including panels and window and view positions. It would likely save that reflection state. Link to comment Share on other sites More sharing options...
Rupert Posted February 3, 2017 Share Posted February 3, 2017 Talon is correct. I have at least a dozen saved flights based upon what aircraft or conditions I choose to fly at any given time. Each one is identified with the specific aircraft and other identifying info which I put my personalized settings into earlier. After starting the sim all you have is click on Load when the screen showing location and aircraft of your default flight comes up. Clicking on Load will provide a listing of all your saved flights. Select the saved flight for whatever aircraft you choose. That aircraft will then come up with your desired settings & also the location etc. from when you launched that flight from last. If you don't want to takeoff from the saved flight location or at the saved time or weather. Click on time, world, weather, etc. and set it for that flight before you start the flight. Doing this shouldn't affect your aircraft settings including whether or not you want to see shadows or reflections, use a 2d or 3d cockpit, etc. I even have flights based upon altitude and distance of the flight. For low and slow "sightseeing" I have the scenery details and traffic set full max. If I'm flying a long high haul in a tubeliner my scenery settings are set to default because at 30K' you can't see a lot of detail anyway. Why risk a OOM error because the CPU is trying to show cars, boats, etc. and give huge scenery detail you can't see at 30K' anyway. ;) Michael Being an old chopper guy I usually fly low and slow. Link to comment Share on other sites More sharing options...
Daniel.T Posted February 3, 2017 Share Posted February 3, 2017 There's a solution basically for the Carenado C90 and C210T but should work with all. You have to make a XML gauge to do "the no-reflection selection" automatically. (L:InitIR,bool) ! if{ 1 (>L:WINDOWSTINTBOOL2,bool) 1 (>L:InitIR,bool) } Put this code code into a text file, called IR_off.xml Put the xml file in a new subsfolder to your panel folder, named Controls In the first Vcockpit section of the panel.cfg file, add Gaugexx = Controls!IR_Off, 0,0,1,1 to the bottom (adjust xx to the next unused number) If it can help... this time. i7-4790K @4400 on Gigabyte Z97X (16gb), GeForce GTX 970 OC, Corsair Spec case Win7 Ult(64) on Samsung850 SSD(256), FSX+Accell on Samsung850 SSD(256), Track IR5 Saitek yoke/rudder radio/multi/switch panels, Logitech G13, GMap on Samsung tab Link to comment Share on other sites More sharing options...
tom_3123 Posted February 4, 2017 Author Share Posted February 4, 2017 Thank you for your help. I agree saving a flight with everything off is great except I fly with Air Hauler and it loads its own flight and the saved file would not get used. I will try the xml gauge above... Will this turn off the gauge as well as the window reflection? Thanks Tom Link to comment Share on other sites More sharing options...
Daniel.T Posted February 4, 2017 Share Posted February 4, 2017 Yes it is to remove gauges and glass reflection every time the plane is load. And there is another tweak possible for a few models. There's some replacement files (for the panel folder) on the net. Suggest to check on Avsim. But with those files, you risk to loose the "tint" in the glasses... i7-4790K @4400 on Gigabyte Z97X (16gb), GeForce GTX 970 OC, Corsair Spec case Win7 Ult(64) on Samsung850 SSD(256), FSX+Accell on Samsung850 SSD(256), Track IR5 Saitek yoke/rudder radio/multi/switch panels, Logitech G13, GMap on Samsung tab Link to comment Share on other sites More sharing options...
tom_3123 Posted February 4, 2017 Author Share Posted February 4, 2017 So far I have managed to get two of my many AC to turn off the gauge reflection. Thank you so much for this tip. Any chance you know the code to turn off the windscreen reflection as well? Thanks again Daniel... Link to comment Share on other sites More sharing options...
Brian210 Posted July 15, 2020 Share Posted July 15, 2020 Hi Daniel, Thanks for XML file which I have used on my Carenado 208 Grand Caravan EX. however, it has succeeded in turning off the instrument Reflections, but it has not turned off the VC Windows .... I wonder if you have any further info so that I can permanently turn off the VC Window tint ? cheers, Brian Link to comment Share on other sites More sharing options...
billythebassman Posted October 19, 2020 Share Posted October 19, 2020 Any ideas on turning off both gauge and windows reflections at the same time? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now