bayu9 Posted February 5, 2016 Share Posted February 5, 2016 I got a freeware qatar airways Skyspirit 777 300ER The problem I got is that I cannot seem to get the jetways in the position of the main doors I would like to know the coordinates for the main doors in the airplane Any help would be fully appreciated :D Cheers, Prototypebayu8 Link to comment Share on other sites More sharing options...
mrzippy Posted February 5, 2016 Share Posted February 5, 2016 TDS 777? I don't think so! Give the filename of the 777-300er that you have. These are from the WOAI 777-300er. Might work as a starting point and may need fine tuning. [exits] number_of_exits = 2 exit.0 = 0.40, 65.00, -10.00, 7.00, 0 exit.1 = 0.40, -33.00, 9.50, -4.50, 1 Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
bayu9 Posted February 6, 2016 Author Share Posted February 6, 2016 Sorry guys I found out myself a good coordinate Here it is : [exits] number_of_exits = 4 exit.0 = 0.1, 90.8, -10.8, 10.5, 0 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) exit.1 = 0.4, -146.0, 8.0, -7.5, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) exit.2 = 0.4, -42.30, 9.0, -7, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) exit.3 = 0.4, -42.30, 9.0, -7, 2 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) Link to comment Share on other sites More sharing options...
bayu9 Posted February 6, 2016 Author Share Posted February 6, 2016 Sorry guys I found out myself a good coordinate Here it is : [exits] number_of_exits = 4 exit.0 = 0.1, 90.8, -10.8, 10.5, 0 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) exit.1 = 0.4, -146.0, 8.0, -7.5, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) exit.2 = 0.4, -42.30, 9.0, -7, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) exit.3 = 0.4, -42.30, 9.0, -7, 2 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency) Link to comment Share on other sites More sharing options...
bayu9 Posted February 6, 2016 Author Share Posted February 6, 2016 TDS 777? I don't think so! Give the filename of the 777-300er that you have. These are from the WOAI 777-300er. Might work as a starting point and may need fine tuning. [exits] number_of_exits = 2 exit.0 = 0.40, 65.00, -10.00, 7.00, 0 exit.1 = 0.40, -33.00, 9.50, -4.50, 1 Thx a lot I found out the coordinates myself, Now I would like to know the gate coordinates for the POSKY 777 200LR Heres the link: http://cdn.poskyarchive.com/777-200/Liveries/Qatar%20Airways%20777-2DZ-LR.zip Help would be appreciated Thanks !! PrototypeBayu8 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.