Jump to content

Altitude calls


beroun

Recommended Posts

Hi (FS2004),

I have a great Altitude call gauge on all aircraft I fly but sometimes, for some reason the altitude calls can not be heard. I tried all kinds of combinations but the calls are either OK or not there! I have the gauge and sound file installed, and a proper entry in the panel.cfg file (Bottom in red shows the one for Lear)

Any idea why the calls are sporadic? Or what could be causing that the calls are not always heard.

 

[Window00]

file=Forward_640.bmp

file_1024=Forward_1024.bmp

size_mm=640

position=7

visible=1

ident=MAIN_PANEL

 

gauge00=Lear_45!AOA, 19, 122

gauge01=Lear_45!Chronometer, 0, 174

gauge02=Lear_45!Gear Lever, 586, 204

gauge03=Lear_45!Left Gear Light, 595, 184

gauge04=Lear_45!Right Gear Light, 616, 184

gauge05=Lear_45!Nose Gear Light, 605, 163

gauge06=Lear_45!Pitot Heat, 7, 237

gauge07=Lear_45!Deice, 38, 237

gauge08=Lear_45!Navigation Lights, 4, 264

gauge09=Lear_45!Strobe Lights, 34, 264

gauge10=Lear_45!Landing Lights, 8, 298

gauge11=Lear_45!Master Caution, 125, 30

gauge12=Lear_45!PFD,68, 76

gauge13=Lear_45!EICAS, 255, 76

gauge14=Lear_45!Radio Stack, 453, 143

gauge15=Lear_45!Pitch Trim, 535, 15

gauge16=Lear_45!Aileron Trim, 560, 26

gauge17=Lear_45!Rudder Trim, 608, 24

gauge18=Lear_45!Backup Airspeed, 442, 75

gauge19=Lear_45!Backup Attitude, 508, 75

gauge20=Lear_45!Backup Altimeter, 574, 75

gauge21=Lear_45!Left Starter, 515, 312

gauge22=Lear_45!Right Starter, 539, 312

gauge23=Lear_45!Battery, 445, 312

gauge24=Lear_45!Left Alternator, 467, 312

gauge25=Lear_45!Right Alternator, 489, 312

gauge26=Lear_45!Fuel Left Standby, 565, 312

gauge27=Lear_45!Fuel Right Standby, 617, 312

gauge28=Lear_45!Fuel Crossfeed, 591, 312

gauge29=Lear_45!Autopilot, 208, 16

gauge30=Lear_45!Nav GPS Switch, 178, 24

gauge31=SimIcons!Kneeboard Icon, 597, 276

gauge32=SimIcons!ATC Icon, 611, 276

gauge33=SimIcons!Map Icon, 625, 276

gauge34=SimIcons!GPS Icon, 270, 50

gauge35=SimIcons!ECU Icon, 611, 290

gauge36=SimIcons!Compass Icon, 625, 290

gauge37=switch!Icon Pushback, 568,250,12,12

gauge38=cpt.icons!560,568,236,12,12

gauge39=GPWS_Sound!dsd_xml_sound3, 0,0,,, ./sound/GPWS/Sound.ini

gauge40=rcb-gauges!GPWS3_3_MasterWarn, 597,290,12,12

Peter Bendl

ex. British Airways

Link to comment
Share on other sites

Hello Beroun,

in your Panel.cfg there are missing entries about the callouts

 

 

gaugeXX=CALLOUT_SOUND!dsd_xml_sound3, 0,0,0,0, Sound\CALLOUT\Sound.ini

gaugeXX=CALLOUT_BigJets!CALLOUT2500, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT1000, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT500, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT100, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT50, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT40, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT30, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT20, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUT10, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUTAPPMIN, 0,0,0,0

gaugeXX=CALLOUT_BigJets!CALLOUTMIN, 0,0,0,0

 

Look here or at another downloadside i,e. AVSIM etc for a zip file called boeing_callouts_fsx.zip it also work with fs2004. read the readme.txt file in the zip. inside this zip is good install Explanation.

good luck

Link to comment
Share on other sites

Hi,

My panel.cfg does not have to have the call-outs entries. My gauge 39 refers to the sound files in the sound folder. You are referring to the BigJets call outs, which are probably set differently. Also my call-outs now work just fine after I start the flight in the Instrument Panel view and then switch to Virtual Cockpit. Thanks for answering anyway. Regards

Peter Bendl

ex. British Airways

Link to comment
Share on other sites

I see your Problem, you can only hear the callouts in the 2D Panel. its clear

You have to put the gauges also in the VC Section in your Panel.cfg then you can also hear the callouts when you start your flight and go in the descent or Approach.

here the exampe from my B747 Panel.cfg - Look at gauge number 21+22 thats are the same like in the Window00, but here in the Virtual Cockpit Section, it is in the same Panel.cfg but down under the other 2D Panel entries Window00 - WindowXY

 

[VCockpit01]

size_mm=512,512

pixel_size=512,512

texture=$747_1

background_color=0,0,0

gauge00=Boeing747-400!Standby Altimeter, 0, 113, 111, 101

gauge01=Boeing747-400!Standby Airspeed Indicator, 112, 114, 111, 110

gauge02=Boeing747-400!Standby Attitude Indicator, 113, 1, 111, 111

gauge03=Boeing747-400!Primary Flight Display, 6, 234, 243, 267

gauge04=Boeing747-400!Multi-Function Display, 286, 259, 224, 252

gauge05=Boeing747-400!Clock, 1, 1, 113, 113

gauge06=Boeing747-400!EICAS Display, 286, 2, 224, 252

gauge07=Magnetic_Compass!Magnetic-Compass,225, 166, 60, 59

gauge08=Boeing747-400!Autopilot IAS-Mach Window, 233, 0, 45, 15

gauge09=Boeing747-400!Autopilot VS Window, 226, 15, 59, 16

gauge10=Boeing747-400!Autopilot Heading Window, 233, 31, 45, 15

gauge11=Boeing747-400!Autopilot Altitude Window, 226, 47, 59, 16

gauge12=Boeing747-400!Autopilot Hdg Switch, 259, 253, 25, 29

gauge13=Boeing747-400!Autopilot Localizer Switch, 256, 64, 29, 30

gauge14=Boeing747-400!Autopilot Approach Switch, 226, 96, 29, 29

gauge15=Boeing747-400!Autopilot VS Switch,256, 96, 29, 29

gauge16=Boeing747-400!Autopilot Nav Switch, 226, 126, 29, 29

gauge17=Boeing747-400!Autopilot IAS-Mach Switch, 256, 126, 29, 30

gauge18=Boeing747-400!Autopilot Speed Switch, 257, 285, 29, 29

gauge19=Boeing747-400!Autopilot Altitude Hold Switch, 226, 64, 29, 30

gauge20=Boeing747-400!Autopilot Master Switch, 259, 227, 25, 24

 

gauge21=GPWS_Sound!dsd_xml_sound3, 0,0,,, ./sound/GPWSalrot747vc/Sound.ini

gauge22=rcb-gauges!GPWS3_3_Default, 613,751,82,31

 

gauge23=Boeing747-400!Nav Display Switch, 264, 98

Link to comment
Share on other sites

Thanks Mr Bojangles,

I tried that exactly as you are suggesting, but for some reason placing these two entries:

gaugexx=GPWS_Sound!dsd_xml_sound3, 0,0,,, ./sound/GPWS/Sound.ini

gaugexx=rcb-gauges!GPWS3_3_MasterWarn, 597,290,12,12

under the Lear's [VCockpit01] section caused my FS to shut down. Could not even open the flight. It was definitely this entry because removing it opened FS OK. BUT now even with the entry ONLY! under the main panel [Window00], the call-outs are heard when I fly in virtual cockpit (without the entries there!). BUT must start the flight in Instrument panel and then switch to the virtual cockpit. Bit of a puzzle.

Peter Bendl

ex. British Airways

Link to comment
Share on other sites

Hello, yes you are right. I tried it yesterday and Fs breaks to.

So I puzzled with this two lines in the Panel.cfg

 

gauge21=GPWS_Sound!dsd_xml_sound3, 0,0,,, ./sound/GPWSalrot747vc/Sound.ini

gauge22=rcb-gauges!GPWS3_3_Default, 613,751,82,31

 

here is my solution.

Its enough when these gauges (gauge GPWS_Sound and rcb-Gauges) are in the [VCockpit01] at the last Position stands. and NOT again in the main Panel section [WINDOW00]. then I dont Need the boeing callout gauges, cause in the GPWS_Sound

Gauge resp. the included file GPWSalrot747vc has always the Wav files in there.

 

So here t gives two different Solutions.

1. Either try the boeing callouts only OR 2. try the GPWS_Sound plus rcb-gauges

 

I hope this will help you a Little. If you have furter questions so ask me or here in the Forum.

 

for now good flight and happy landings

Link to comment
Share on other sites

Many thanks.

I am OK now with the entries in Panel.cfg under [Window00] only. As mentioned, must start the flight in the Instrument view and then switch to Virtual cockpit. It is actually OK, since I always like to set the flight in Instrument view anyway.

Happy New Year and many safe landings.

Peter Bendl

ex. British Airways

Link to comment
Share on other sites

  • 3 months later...

I noticed something. But I haven't tested this.

 

In post 3 you mention you added it to the vc. The second gaugeXX you list has coordinates 597, 290

 

but below vcockpit01 it says: size_mm=512, 512

maybe that's why fs crashed? The gauge is outside the defined visual area.

 

In the window01 those coordinates work. In window01 it says size_mm=640

 

try changing the coordinates of the gauge in the vc to 10, 10 for example. May save you from having to start from 2D every time.

[sIGPIC][/sIGPIC]
Link to comment
Share on other sites

  • 1 year later...

hi, I am using airbus 320, everything is running well except the call out file here I paste the cfg file praying that some one might help me please please

 

[fltsim.0]

title=Airbus A320-200 IAE RJ

sim=pa320-v2527

model=200_IAE

panel=

sound=

texture=RJ

kb_checklists=

kb_reference=

atc_id=VH-JQL

atc_airline=Jordanian

atc_flight_number=8889

atc_heavy=0

ui_manufacturer="Airbus"

ui_type="A320-200"

ui_variation="Royal Jordanian"

ui_typerole="Commercial Airliner"

ui_createdby="Project Airbus"

description=Project Airbus A320\nRepaint by Karen Romalta\nwww.mcphatstudios.com\nemail:karen@mcphatstudios.com\n\n\n

 

 

[forcefeedback]

gear_bump_nose_magnitude=3000 ; 0 - 10000

gear_bump_nose_direction=18000 ; 0 - 35999 degrees

gear_bump_nose_duration=250000 ; in microseconds

gear_bump_left_magnitude=2700 ; 0 - 10000

gear_bump_left_direction=35500 ; 0 - 35999 degrees

gear_bump_left_duration=250000 ; in microseconds

gear_bump_right_magnitude=2700 ; 0 - 10000

gear_bump_right_direction=00500 ; 0 - 35999 degrees

gear_bump_right_duration=250000 ; in microseconds

ground_bumps_magnitude1=1300 ; 0 - 10000

ground_bumps_angle1=08900 ; 0 - 35999 degrees

ground_bumps_intercept1=3.0

ground_bumps_slope1=0.20

ground_bumps_magnitude2=200 ; 0 - 10000

ground_bumps_angle2=09100 ; 0 - 35999 degrees

ground_bumps_intercept2=1.075

ground_bumps_slope2=0.035

crash_magnitude1=10000 ; 0 - 10000

crash_direction1=01000 ; 0 - 35999 degrees

crash_magnitude2=10000 ; 0 - 10000

crash_direction2=9000 ; 0 - 35999 degrees

crash_period2=75000 ; in microseconds

crash_duration2=2500000 ; in microseconds

 

 

 

 

 

 

 

 

 

[WEIGHT_AND_BALANCE]

//Cebu Pacific A320-214 RP-C3241 config

 

 

//Pax Zonings

station_load.0= "7605.9, 21.24, 0.000, 0.000, CAB OA (60)"

station_load.1= "7149.6, -3.33, 0.000, 0.000, CAB OB (60)"

station_load.2= "6541.1, -26.34, 0.000, 0.000, CAB OC (59)"

 

//Cargo & Baggage

station_load.3= "2921.1, 22.10, 0.000, 0.000, CPT 1" //Compartment 1 (7500lbs)

station_load.4= "3086.5, -11.99, 0.000, 0.000, CPT 3" //Compartment 3 (5349lbs)

station_load.5= "1190.5, -22.67, 0.000, 0.000, CPT 4" //Compartment 4 (4652lbs)

station_load.6= "171.96, -33.11, 0.000, 0.000, CPT 5" //Compartment 5 (3300lbs)

 

 

//Basic Weight 42637 kgs | 93998 lb

//Crew 3/4(1 OBS)= 520 kgs | 1146 lbs

//Pantry Wgt Sector- DOM= 570 kgs | 1257 lbs

-----------------------------------------------------------

//Dry Operating Weight/Index= 43727 kgs | 96401 lbs 56.5

-----------------------------------------------------------

//"weights in kilos"

//ZFWCG/MACZFW= 31.8% / 56.7

 

empty_weight=96401.4

empty_weight_roll_MOI=950400.000000

empty_weight_pitch_MOI=1690000.000000

empty_weight_yaw_MOI=1250000.000000

empty_weight_coupled_MOI=0.000000

max_gross_weight=162039.6

reference_datum_position=0.0000,0.000000,0.000000

empty_weight_CG_position=0.63,0.000000,0.000000

CG_forward_limit=0.18

CG_aft_limit=0.40

 

 

//Weight & Balance prepared by PB. (Version 179 Y)

 

 

 

[airplane_geometry]

wing_area=1317.503

wing_span=111.833333

wing_root_chord=13.76

wing_dihedral=3.298901

wing_incidence=-3.5

wing_twist=-1.600000

oswald_efficiency_factor=0.745

wing_winglets_flag=1

wing_sweep=25.0000

wing_pos_apex_lon=16.813

wing_pos_apex_vert=0.70000

htail_area=333.681

htail_span=41.666667

htail_pos_lon=-57.33688

htail_pos_vert=6.500000

htail_incidence=1.500000

htail_sweep=0.000000

vtail_area=231.424

vtail_span=17.991665

vtail_sweep=0.000000

vtail_pos_lon=-54.51698

vtail_pos_vert=19.915

elevator_area=76.500000

aileron_area=57.0

rudder_area=56.200000

elevator_up_limit=25.0

elevator_down_limit=15.0

aileron_up_limit=25.0

aileron_down_limit=15.0

rudder_limit=25.0

elevator_trim_limit=13.5

spoiler_limit=50.0

spoilerons_available=1

aileron_to_spoileron_gain=1.5

min_ailerons_for_spoilerons=12

min_flaps_for_spoilerons=0

auto_spoiler_available=1

spoiler_extension_time=1.500000

positive_g_limit_flaps_up=4.000000

positive_g_limit_flaps_down=3.000000

negative_g_limit_flaps_up=-3.000000

negative_g_limit_flaps_down=-2.000000

 

 

[General]

performance=A320-232\nIAE V2527-A5\n\nMZFW: 61,000 KG\nMTOW: 73,500 KG\nMLW: 64,500 KG\n

atc_type=Airbus

atc_model=A320

Category=airplane

 

//Air Macau weight limits

 

[GeneralEngineData]

engine_type=1

fuel_flow_scalar=1.086

Engine.0=13.500000,-18.95,-5.125

Engine.1=13.500000,18.95,-5.125

min_throttle_limit=-0.429

 

 

[Reference Speeds]

flaps_up_stall_speed=128.000

full_flaps_stall_speed=102.000

cruise_speed=462.0

max_indicated_speed=350.000000

max_mach=0.820

 

 

 

[autopilot]

autopilot_available=1

flight_director_available=1

default_vertical_speed=1000

autothrottle_available=1

use_no_default_pitch= 1

use_no_default_bank= 1

pitch_takeoff_ga=18

autothrottle_arming_required= 1

autothrottle_takeoff_ga= 1

autothrottle_max_rpm= 96.5

default_pitch_mode=0

default_bank_mode=0

max_pitch= 10.00

max_pitch_acceleration= 2.00

max_pitch_velocity_lo_alt= 4.00

max_pitch_velocity_hi_alt= 1.50

max_pitch_velocity_lo_alt_breakpoint= 20000

max_pitch_velocity_hi_alt_breakpoint= 24000

max_bank= 25.00

max_bank_acceleration= 2.0

max_bank_velocity= 3.0

max_throttle_rate= 0.30

nav_proportional_control= 12.00

nav_integrator_control= 0.05

nav_derivative_control= 0.01

nav_integrator_boundary= 0.5

nav_derivative_boundary= 0.35

gs_proportional_control= 15.0

gs_integrator_control= 0.30

gs_derivative_control= 0.00

gs_integrator_boundary= 0.7

gs_derivative_boundary= 0.00

yaw_damper_gain= 1.00

 

[direction_indicators]

direction_indicator.0=3,0

 

[EFFECTS]

wake=fx_wake

water=fx_spray

dirt=fx_tchdrt

concrete=fx_sparks

touchdown=fx_tchdwn320, 1

 

[RADIOS]

Audio.1= 1

Com.1 = 1, 1

Com.2 = 1, 1

Nav.1 = 1, 0, 1

Nav.2 = 1, 0, 0

Adf.1 = 1

Transponder.1= 1

Marker.1= 0

 

[contact_points]

static_pitch=-0.319722

static_cg_height=11.60811023622

 

point.0=1.0, 38.84,0.0,-11.9619,800,0.0,1.53379,68.0,1.0,1.4390,0.680000, 13.2,12.9,0.000000,252.000000,282.0

point.1=1.0,-3.660,-12.458,-12.22,1200,1.000000,1.680382,0.000000,0.72,1.5419948,0.81,14.000000,13.700000,2.000000,252.000000,282.000000

point.2=1.0,-3.660,12.458,-12.22,1200,2.000000,1.680382,0.000000,0.72,1.5419948,0.80,14.200000,13.300000,2.000000,252.000000,282.000000

point.3=2.0,-13.750000,-54.583333,-0.500000,750.924659,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,5.000000,0.000000,0.000000

point.4=2.0,-13.750000,54.583333,-0.500000,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,6.0,0.0,0.0

point.5=2.0,-71.250000,0.0,0.750,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,9.0,0.0,0.0

point.6=2.0,51.666667,0.0,-8.166667,750.924659,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,4.0,0.0,0.0

gear_system_type=0

 

 

[fuel]

Center1= 4.15, 0.0, -4.00, 2179.6, 8.0

LeftMain= 3.31, -19.6, 1.40, 1829.6, 5.0

LeftAux= -4.80, -36.4, 2.20, 232.5, 5.0

RightMain= 3.31, 19.6, 1.40, 1829.6, 5.0

RightAux= -4.80, 36.4, 2.20, 232.5, 5.0

fuel_type=2.0

number_of_tank_selectors=1

electric_pump=0

 

[keyboard_response]

aileron=180.000000,130.000000

 

[pitot_static]

vertical_speed_time_constant=99

pitot_heat=1.000000

 

[Views]

eyepoint=43.22074, -1.73061,4.355627

 

 

[Flaps.0]

type=1

span-outboard=0.85

extending-time=21.000

system_type=1

damaging-speed=233.000

blowout-speed=250.000

flaps-position.0=0.000,

flaps-position.1=0.000,

flaps-position.2=15.000,

flaps-position.3=20.000,

flaps-position.4=26.000,

flaps-position.5=35.000,

lift_scalar=0.0

drag_scalar=0.0

 

 

[flaps.1] //slats

type=2

span-outboard=0.95

extending-time=20

flaps-position.0=0

flaps-position.1=18,

flaps-position.2=18,

flaps-position.3=22,

flaps-position.4=22,

flaps-position.5=27,

blowout-speed=260

lift_scalar=0.35

drag_scalar=0.45

pitch_scalar=0.3

system_type=1

 

[flaps.2] //flaperons

type=2

span-outboard=0.85

extending-time=11.000

system_type=1

damaging-speed=233.000

blowout-speed=250.000

flaps-position.0=0.000,

flaps-position.1=0.000,

flaps-position.2=5.000,

flaps-position.3=5.000,

flaps-position.4=5.000,

flaps-position.5=5.000,

lift_scalar=0.20

drag_scalar=0.32

 

[flaps.3] //actual flaps

type=1

span-outboard=0.85

extending-time=21.000

system_type=1

damaging-speed=233.000

blowout-speed=250.000

flaps-position.0=0.000,

flaps-position.1=0.000,

flaps-position.2=10.000,

flaps-position.3=15.000,

flaps-position.4=20.000,

flaps-position.5=35.000,

lift_scalar=0.62

drag_scalar=1.1

 

[jet_engine]

thrust_scalar=1.000

 

[TurbineEngineData]

fuel_flow_gain=0.00206

inlet_area=29.3000

rated_N2_rpm=15183.000000

static_thrust=26633.500000 //do not change!

afterburner_available=0

reverser_available=1

bypass_ratio=4.80

 

[exits]

number_of_exits=2

exit_rate.0=0.19

exit_rate.1=0.17

 

 

[flight_tuning]

elevator_effectiveness=1.0

pitch_stability=1.2

roll_stability=1.0

yaw_stability=1.0

aileron_trim_effectiveness=0.9

rudder_trim_effectiveness=1.1

cruise_lift_scalar = 1.35

 

[LIGHTS]

light.0=3, -13.90, -55.25, 2.45, fx_navred320pa

light.1=3, -13.90, 55.25, 2.45, fx_navgre320pa

light.2=3, -69.70, 0.00, 4.70, fx_navwhi320pa ,

light.3=2, -69.70, 0.00, 4.70, fx_strobe2320pa ,

light.4=2, -13.95, -55.25, 2.45, fx_strobe320pa

light.5=2, -13.95, 55.25, 2.45, fx_strobe320pa

light.6=1, 6.8, 0.00, -5.80, fx_beacon320pa ,

light.7=1, 3.83, 0.00, 8.47, fx_beacon320pa ,

light.8=4, 44.41, 0.00, 3.50, fx_vclight ,

 

 

[sMOKESYSTEM]

smoke.0=88.0,-17.3,-39.8, fx_contrail_320

smoke.1=88.0,-17.3,39.8, fx_contrail_320

 

 

[TailHook]

tailhook_length=4

tailhook_position=-15.0, 0.0, -1.0

cable_force_adjust=0.9

 

[folding_wings]

wing_fold_system_type=4

fold_rates=0.11,0.13

 

[electrical]

;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4)

electric_always_available=1

flap_motor=0, 5 , 17.0

gear_motor=0, 5 , 17.0

autopilot=0, 5 , 17.0

avionics_bus=0, 0, 17.0

avionics=1, 0 , 17.0

pitot_heat=0, 2 , 17.0

additional_system=0, 0, 17.0

marker_beacon=1, 2 , 17.0

gear_warning=0, 2 , 17.0

fuel_pump=0, 5 , 17.0

starter1=0, 20, 17.0

light_nav=0, 0 , 17.0

light_beacon=0, 5 , 17.0

light_landing=0, 5 , 17.0

light_taxi=0, 5 , 17.0

light_strobe=0, 5 , 17.0

light_panel=0, 0 , 17.0

 

 

[brakes]

toe_brakes_scale=0.545

parking_brake=1

auto_brakes=4

 

[gear_warning_system]

gear_warning_available=0

pct_throttle_limit=0.099976

flap_limit_power=25.496622

flap_limit_idle=5.042029

 

[hydraulic_system]

electric_pumps=0

engine_map=1,1,0,0

normal_pressure=3000.000000

 

[stall_warning]

type=1

stick_shaker=1

 

[attitude_indicators]

attitude_indicator.0=1

 

[turn_indicators]

turn_indicator.0=1,0

 

//FDE copyright Peter Binamira - //peter@philskies.net

//-for Project Airbus A320 0nly-

[vacuum_system]

max_pressure=5.150000

vacuum_type=2

electric_backup_pressure=0.000000

engine_map=0,0,0,0

[pneumatic_system]

max_pressure=18.000000

bleed_air_scalar=1.000000

[deice_system]

structural_deice_type=0

 

gaugexx=CALLOUT_SOUND!dsd_xml_sound3, 0,0,0,0, Sound\CALLOUTA\Sound.ini

gaugexx=CALLOUT_BigJets!CALLOUT2500, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT1000, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT500, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT100, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT50, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT40, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT30, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT20, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUT10, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUTAPPMIN, 0,0,0,0

gaugexx=CALLOUT_BigJets!CALLOUTMIN, 0,0,0,0

Link to comment
Share on other sites

That's real nice.........but that ain't where it goes! Read the README again. Those entries go into your Panel.cfg. The following is an example of my DC-10. Each callout is a gauge and gauges are used in the panel.

 

[Window00]
file_1024=panelmain.bmp
file_1024_night=panelmainL.bmp
Background_color=0,0,0 
size_mm=1280,1024
window_size=1.000,1.000
position=7
visible=1
ident=MAIN_PANEL

gauge00=tomdc10!autopilot, 636, 457, 634, 144
gauge01=tomdc10!autopilotannunciator, 172, 580, 137, 24
gauge02=tomdc10!glarewarn, 98, 500, 257, 43
gauge03=tomdc10!masterwarn, 464, 465, 19, 19
gauge04=tomdc10!mastercaut, 495, 504, 19, 19
gauge05=tomdc10!masterfire, 529, 543, 19, 19
gauge06=tomdc10!eng_reverserind, 753, 650, 249, 19
gauge07=tomdc10!eng_n1_01, 757, 856, 67, 67
gauge08=tomdc10!eng_n1_02, 845, 856, 67, 67
gauge09=tomdc10!eng_n1_03, 931, 856, 67, 67
gauge10=tomdc10!eng_egt_01, 757, 768, 67, 67
gauge11=tomdc10!eng_egt_02, 845, 768, 67, 67
gauge12=tomdc10!eng_egt_03, 931, 768, 67, 67
gauge13=tomdc10!eng_ff_01, 757, 942, 67, 67
gauge14=tomdc10!eng_ff_02, 845, 942, 67, 67
gauge15=tomdc10!eng_ff_03, 931, 942, 67, 67
gauge16=tomdc10!eng_epr_01, 757, 681, 67, 67
gauge17=tomdc10!eng_epr_02, 845, 681, 67, 67
gauge18=tomdc10!eng_epr_03, 931, 681, 67, 67
gauge19=tomdc10!eng_pointerreset, 1084, 611, 32, 32
gauge20=tomdc10!VSI, 357, 796, 93, 93
gauge21=tomdc10!ATT, 146, 616, 188, 190
gauge22=tomdc10!IASbackup, 629, 906, 104, 104
gauge23=tomdc10!ALTbackup, 632, 789, 97, 96
gauge24=tomdc10!omi, 535, 658, 42, 103
gauge25=tomdc10!hydpress, 429, 913, 76, 76
gauge26=tomdc10!hydpress, 524, 914, 76, 76
gauge27=tomdc10!fuelqty, 495, 790, 91, 92
gauge28=tomdc10!stbyhor, 624, 653, 114, 113
gauge29=tomdc10!IAS, 10, 640, 121, 121
gauge30=tomdc10!voradf, 2, 847, 135, 137
gauge31=tomdc10!ALT, 417, 648, 110, 109
gauge32=tomdc10!radioalt, 345, 636, 58, 137
gauge33=tomdc10!hsi, 160, 815, 159, 158
gauge34=tomdc10!dmeind, 18, 799, 101, 24
gauge35=tomdc10!tassat, 361, 939, 38, 57
gauge36=tomdc10!spdbrkwarn, 1014, 691, 27, 18
gauge37=tomdc10!controlind, 1056, 913, 101, 94
gauge38=tomdc10!flapsind, 1059, 786, 101, 100
gauge39=tomdc10!gear, 1183, 715, 91, 233
gauge40=tomdc10!eprcomp, 1067, 687, 85, 79
gauge41=tomdc10!apatmasterannun, 77, 589, 61, 29
gauge42=tomdc10!apmasterannun, 348, 557, 32, 62
gauge43=SimIcons!Kneeboard Icon, 30, 991, 22, 22
gauge44=SimIcons!ATC Icon, 54, 991, 22, 22
gauge45=SimIcons!Overhead Icon, 174, 991, 22, 22
gauge46=SimIcons!ECU Icon, 126, 991, 22, 22
gauge47=SimIcons!Map Icon, 78, 991, 22, 22
gauge48=SimIcons!Avionics Icon, 150, 991, 22, 22
gauge49=SimIcons!GPS Icon, 102, 991, 22, 22
gauge50=tomdc10!sys1 Icon, 198, 991, 22, 22
gauge51=tomdc10!panellights, 1008, 610, 42, 49
gauge52=CALLOUT_SOUND!dsd_xml_sound3, 0,0,0,0, ./Sound/CALLOUT/Sound.ini
gauge53=CALLOUT!CALLOUT2500,      0,0,0,0
gauge54=CALLOUT!CALLOUT1000,      0,0,0,0
gauge55=CALLOUT!CALLOUT500,      0,0,0,0
gauge56=CALLOUT!CALLOUT400,      0,0,0,0
gauge57=CALLOUT!CALLOUT300,      0,0,0,0
gauge58=CALLOUT!CALLOUT200,      0,0,0,0
gauge59=CALLOUT!CALLOUT100,      0,0,0,0
gauge60=CALLOUT!CALLOUT50,      0,0,0,0
gauge61=CALLOUT!CALLOUT40,      0,0,0,0
gauge62=CALLOUT!CALLOUT30,      0,0,0,0
gauge63=CALLOUT!CALLOUT20,      0,0,0,0
gauge64=CALLOUT!CALLOUT10,      0,0,0,0
gauge65=Z_PAPA380!Taxi Lights Switch,  1020,780, 25,30

Still thinking about a new flightsim only computer!  ✈️

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...