N2587X

I have too had many problems with this A320. I have learned how to fly this jet reading the 300 plus page book i bought and this plane does not fly at all right at the moment. First the 2nd autopilot button is for self landing autopilot. This is pushed during approach so that the plane will land and flair by it's self, but this in not modeled in MFS 2020. The problems i am having with the A320 is one in the air with autopilot on, the plane starts rocking back and forth from side to side. Then the other issue is at random times the plane will start turning off course while in nav mode and bank at about 80 degrees and then i crash. And last when i fly this plane or any plane for this matter, i lose my mouse during flight. My mouse pointer is on the screen and i can point it to a button or switch but i can't click anything with the mouse. It moves around when i move it but you can't click on anything. So I think this sim has a long way to getting things right. Back to X-Plane for a while i guess.

There are two of these really high bumps at KSEE on taxiway E which there is no taxiway E on the real airport but they have it in MFS 2020 for some reason. These bumps are about 5 inches high and when taxiing down the runway in a small plane, they will stop you dead in the water. And you can't get over them once this happens. I have sent in an email to MFS 2020 telling them this and they did nothing about it as so today. :-(

So I have had a few problems when flying the Airbus 320 Neo. One problem i have is I can start it up, taxi and takeoff with no issues. but after 5-10 minutes or so, the plane will start rocking back and forth. Then the other thing that happens as I'm flying along with the autopilot on, all of a sudden without me touching anything the plane will start banking to the right or left at 80 degree bank. This seems to happen every time i fly this plane. I have not been able to fly from San Diego to Los Angeles or San Diego to Phoenix with these weird things happening. Then tonight, I almost got to KLAX and my mouse stopped working. I can move it around on the screen but could not click on any switch or knob. So I don't understand why I'm having all these issues with this plane but I watch many people on YouTube flying this plane and for hours having no problems like what I'm having. Does anyone know why this is happening on my system? Tnx.

Bump....... No one has this plane for FSX?

Hi, can anyone help me with this plane please? I can't find any tech help from anyone regarding this plane i just bought from NEXTGEN Simulations. I have a few problems with this plane. I fly the CJ2 and have for a long time. Over 100 hours in that Jet. But here is my issue this being the major issue. When i installed this plane, i printed the checklists to follow. When i go through this checklist, there are several things when starting the engines that i know should be listed in the checklist but are not. One being the fuel booster pumps and ignition. But mainly the fuel transfer knob. It is only mentioned once in the 7 page checklist and that is during the descent. It says to make sure it's in the off position. Well i can't even start the engines unless i have that knob turned to the left tank only. If i switch it to off or to the right tank, i can't even start the engines. So while i'm flying after a while i get a red master caution saying fuel level off center. Well that's cause i can only fly the plane with the left tank selected. This is the major issue i am having with this plane. I have uninstalled it and reinstalled it twice but no difference. Please someone tell me i'm not doing something right. Now i am using FSX Steam with Windows 10 latest update. Now I've watched 2 video's on you-tube with people flying this jet in X-Plane 11 and it seems to be flying with the fuel transfer knob switched to off. So i know it's got to be something i'm doing wrong that is not listed in the documentation. Then the other minor thing I've not been able to figure out is switch VOR 1 to VOR 2 in the pilot PDF. So if someone knows how to do that correctly, please enlighten me. Tnx

So check this out guys. I have FSX for a long time and i just bought the switch panel, radio panel and auto pilot panel. I can not get any of these to work in FSX no matter what i do. I have contacted Logitech and they gave me the latest driver to install. I did what i was told on how to install it and i can go into the test program that loads with the driver and see all switches work like they should, but when i get into FSX nothing. I even watched a video on youtube of a guy showing how you install the drivers in the CFG file but that did nothing either. So what do you guys use to make these things work in the sim? I run FSX-SE with windows 10.

I was reading your computer that you have for your simulator and i'm just wondering why you are not using Windows 10? I have a similar system that i just built for my sim. I have the Gigabyte X99P-SLI, I7 8700K Processor, Corsair Hydro Series H100i RGB Platinum SE 240 cooling system, EVGA GTX 980 TI Video Card, 2 500gig M.2 Hard Drives, 16gig DDR-4 Ram, M.2 WiFi Card, 1000W Power Supply, Sound Blaster Sub & Speaker System and a 32X DVD Drive. With Saitek Pro Flight Yoke, Saitek Cessna Rudder Peddles, 2 Saitek Throttle Units, Saitek Trim Wheel with Saitek Switch Panel, 2 Saitek Radio's and the Saitek Auto Pilot Panel. All running on Windows 10 Pro 64 I am hoping the stuff i built my system with will run the sim fairly well as i'm kinda new at this thing. I fly real planes and just started with the sim stuff.

So this is what's going on now. Every time i get into the plane to fly cold and dark i start doing my check list to get ready to fly it. And by the way i have to fly it only by dead reckoning due to it not having any navigation. So i just free fly it around not to far so i don't get lost lol, but as i'm going down my check list after about 7 to 10 minutes, the screen goes completely black. I can still hear everything, i can pause it and i can hit the esc key to bring up the end flight screen but can't see anything. Once i end the flight, go back in, i can see everything as normal, but then after 7 minutes, the screen goes black. Does anyone know what's causing this now? I am having so many problems with this plane, i'm thinking on getting my money back and saying forget it. Thats to bad cause i really like the plane and it flys really nice. No other add on company sells the CJ series that i know of either. I cant get help from Carenado on any of these issues ether. PS. I can fly the Citation 550 and it works perfectly. Or for that matter any other planes. I have Windows 10 64, Intel I7, the fastest I7 they made, 16gigs of ram, GTX 980 ti video card w/6gigs vram, 500gig M.3 hard drive, water cooled system and of course FSX Steam.