Canada4XPlane

X-Plane 11 Scenery--CFXP - CBR2 Kaslo British Columbia 1.1. Here is a small weekend scenery project I forgot I had sitting on my hard drive from a while back. Kaslo is a small general aviation field located just west and above the town of Kaslo British Columbia. The airport is located on top of a hill with its only runway perpendicular to Kootenay lake. This gives Kaslo a very unique and challenging approach on both runways. The airport is usually very quiet with little traffic despite its stunning location and beautiful views. This rendition includes accurate models based off of the latest reference, as well as high resolution ground textures. This scenery also features SAM season support as well as dynamic ground textures that change depending on the weather. What Does This Package Include? Seasonal orthophotos (SAM Seasons), seasonal vegetation (SAM Seasons), weather affected ground textures (rain and snow effects), hand placed forests and some autogen building classes, custom models for the airport, custom mesh around Kaslo Airport and CBR2 Kaslo. Requirements: SAM plugin (only for seasonal use) SAM_3.ZIP. By Canada4XPlane.

X-Plane Harbour Air DHC-3 Otter C-FSUB 1.0. This repaint is for the RW Designs single piston Otter. C-FSUB wore many liveries in its day as a piston Otter. First starting out as production number 2 for the RCAF, the aircraft was then sold through many Pacific north-western airlines until it was bought by Harbour Air around the 1990's. There were a few versions of the Harbour Air classic scheme. The one I have tried to replicate is the first iteration after Harbour Air purchased the aircraft. I have seen many images of the airplane on straight floats and wheels under the Harbour Air livery. The aircraft then flew for Air Mont-Laurier until it was brought back to the west coast to be fitted with the turbo conversion. Note, this livery is not perfect and will be update with new PBR and potentially floats in the future. By Canada4XPlane.

X-Plane 11 Scenery--CFXP CBBC Bella Bella British Columbia 1.0. Bella Bella is a small coastal town on the Pacific Northwest coast about an hours flight north of Vancouver. Bella Bella is served primarily by Pacific Coastal. Pacific Coastal will operate SAAB and 1900s between Vancouver, Bella Coola, and Bella Bella on the "PASCO milk run". Pacific Coastal has also been known to operate the legendary Grumman Goose and amphibious Beaver fleet from this airport. This package include seasonal orthophotos (SAM Seasons), seasonal vegetation (SAM Seasons), hand placed forests and some autogen building classes, custom models for the airport plus modeled town + seaplane dock, proper docking models (your plane will not float through the dock), custom mesh around Bella Bella Airport "CFXP - CBBC Mesh", corrected autogen and roads, CBBC Bella Bella, Bella Bella Town, Bella Bella waterdrome, Denny Island Airstrip, and Point Dryad Helicopter pad + working lighthouse. Requirements: Misterx6 Library (latest version (MISTERX_LIBRARY.ZIP). By Canada4XPlane.

X-Plane 11 Scenery--CFXP Canadian North Arctic Pack 1 1.0. Canada4XPlane's Canadian North Arctic Pack contains seven northern airports. These airports have been converted from FSX with permission from the original author. They have been enriched and updated to give you a more realistic feeling. The airports include: CYBK Baker Lake, CYCS Chesterfield Inlet, CYCY Clyde River, CYEK Arviat, CYUB Tuktoyaktuk, CYVM Qikiqtarjuaq and CYXN Whale Cove. Requires the latest versions of the following libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP) and OpenSceneryX (OPENSCENERYX.ZIP). By Canada4XPlane.

X-Plane 11 Scenery--Harbour Grace Airfield Canada4XPlane 1.0. Harbour Grace Airport, is 0.8 nautical miles west of Harbour Grace, Newfoundland and Labrador, Canada. What does this package include? CHG2 airpark, custom hangar, winter textures (JSGME MOD) and volumetric vegetation. Requires the latest versions of the following libraries: CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), and the MisterX Library (MISTERX_LIBRARY.ZIP). Works best with the HD Mesh of the area (optional): XP11_HD_Mesh_V4_+40-060-North_America.zip. By Canada4XPlane.

X-Plane 11 Scenery--CAH3 Courtenay Airpark British Columbia 2.0.1, Canada. The Courtenay Airpark is a small public aerodrome located on the banks of the Courtenay River. It's within easy walking distance of downtown Courtenay, in the beautiful Comox Valley, Vancouver Island, British Columbia, Canada. With its paved 1800x60ft runway, 24/7 self-serve fuel, float plane facilities and central location, the Airpark is a favored destination for aviators from near and far. What Does This Package Include? CAH3 airpark, Courtenay Airpark marina, boat slip and seaplane dock, WT3 compatibility, custom hangars and clubhouse, custom dynamic lighting, and dynamic lighting asphalt, ground traffic, winter textures (JSGME MOD) and volumetric vegetation. Requires the latest versions of the following libraries: CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), and the MisterX Library (MISTERX_LIBRARY.ZIP). By Canada4XPlane.

X-Plane Scenery--CFXP CYQB Static Aircraft Package 1.0. This package gives you static aircraft at CYQB - Quebec. This package works with any CYQB scenery as well as default. This package is recommended and designed to be used with the CFXP - CYQB payware package. Please see the included documentation for further details. Requires the latest versions of the following libraries: CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), and the MisterX Library (MISTERX_LIBRARY.ZIP). By Canada4XPlane.

X-Plane 10 And 11 Scenery--CYEG Edmonton International Airport 1.0.5. Canada4XPlane is happy to present CYEG Edmonton International Airport - "Gateway to Canada's North". After 2 years of development, CYEG V1 is complete. This follows our previous popular upload of CYYC: cyyc_-_calgary_international_airport.zip. Everything is faithfully recreated, with over 100+ custom buildings, plus hundreds of other custom elements included to give you the most realistic experience. Countless hours have been spent on the stunning ground textures by Arslan Nouar. Even with the extremely high detail, this scenery is still FPS friendly and can be used on low budget systems. Includes: CYEG International Airport, Downtown Edmonton buildings, optional winter textures, WT3 compatibility, 100+ custom hangars and terminals, over 100 custom CYEG details, custom dynamic lighting, and dynamic lighting asphalt, accurate static aircraft, ground traffic, winter textures (JSGME MOD), static aircraft delete option (bottom). Requires the latest versions of the following libraries: RA Library 1.2+ (RA_LIBRARY.ZIP), CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP) and OpenSceneryX (OPENSCENERYX.ZIP). Tested in X-Plane 10.51. By Canada4XPlane.

X-Plane 10 And 11 Scenery--CYPR Prince Rupert Airport 1.0. Prince Rupert Airport is an airport located 5.0 nautical miles west southwest of Prince Rupert, British Columbia, Canada. This package features the following: CYPR Airport, WT3 compatibility, custom hangars and terminals, custom dynamic lighting (including asphalt), plus accurate static aircraft and ground traffic. Requires the latest versions of the following libraries: CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP) and OpenSceneryX (OPENSCENERYX.ZIP). Tested in X-Plane 10.51. Special thanks to Sidney Schwartz, author of the original FSX scenery this X-Plane version is based on PRINCE_RUPERT_CYPR.ZIP. Please see the included documentation for more details. By Canada4XPlane.

X-Plane 10 And 11 CYPW "West Coast Flying" 1.0. This is Canada4XPlane's Powell River Airport, Powell River city and surrounding area in British Columbia, Canada. This package features the following: CYPW Airport and basic town modeling, Powell River Warf, Powell River Waterdrome, optional winter textures, WT3 compatibility, custom hangars and terminals, custom dynamic lighting (including asphalt), accurate static aircraft and ground traffic, custom city and harbor details, Blubber Bay harbor/mine, Texada Island and Gilles Bay Airport and mine, plus the Powell River pulp mill and electrical buildings. Requires the latest versions of the following libraries: CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP) and OpenSceneryX (OPENSCENERYX.ZIP). Tested in X-Plane 10.51. By Canada4XPlane.

X-Plane 10 And 11 Scenery--CEA3 Olds-Didsbury Airport HD V3.0. Olds-Didsbury Airport, is located next to Alberta Highway 2A, 4.3 nm south of the Town of Olds, Alberta and 3 nm north of the Town of Didsbury, Alberta, Canada. This X-Plane scenery features stunning HD textures all around, plus accurately placed vegetation of the surrounding area. Optional winter textures, are also included in the download. Requires the latest versions of the following libraries: CFXP Static Aircraft Library (CFXP_-_STATIC_AIRCRAFT_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP) and OpenSceneryX (OPENSCENERYX.ZIP). The optional file: Tree Lines and Farms North America V2, (TREELINES_FARMS_NORTH_AMERICA_V2.ZIP) is highly recommended. Important: "Runway Follows Terrain Contours" must be enabled in X-Plane's settings menu. By Canada4XPlane.

X-Plane 10 And 11 Scenery--Red Deer Regional Airport 2.0. Red Deer Regional Airport, is located 6 nautical miles south southwest of Red Deer, Alberta, Canada. Requires the latest versions of the following object libraries: 3D People Library (3D_PEOPLE_LIBRARY.ZIP), BS2001 Object Library (BS2001_OPEN_ME.ZIP), CDB library (CDB_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), JB Library (JB_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and the RE Library (RE_LIBRARY.ZIP). Tested in X-Plane 10.50. By Canada4XPlane.

X-Plane 10 And 11 CFY4 Indus/Winters Aire Park Airport 1.0. Indus/Winters Aire Park Airport is located 1 nautical mile (1.9 km; 1.2 mi) southwest of Indus, Alberta, Canada. The airport contains two grass airstrips: 09/27 2,600 ft (792 m) and 16/34 2,600 ft (792 m). Requires the latest versions of the following libraries: 3D People Library (3D_PEOPLE_LIBRARY.ZIP), CDB library (CDB_LIBRARY.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), JB Library (JB_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and the RD_Library (RD_LIBRARY.ZIP). By Canada4XPlane.

X-Plane 10 And 11 Scenery--CAZ5 Cache Creek Airport 3.0. Cache Creek Airport is located near Cache Creek, British Columbia, Canada. Requires the latest versions of the following libraries: 3D People Library (3D_PEOPLE_LIBRARY.ZIP), BS2001 Object Library (BS2001_OPEN_ME.ZIP), The Handy Object Library (THE_HANDY_OBJECTS_LIBRARY.ZIP), JB Library (JB_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP), OpenSceneryX (OPENSCENERYX.ZIP) and the RD_Library (RD_LIBRARY.ZIP). 3rd party mesh required (Ortho4XP/Andras Fabian (Alpilotx): XP11_HD_Mesh_V4_+50-130-North_America.zip for X-Plane 11 and XP10_HD_Mesh_V3_+50-130-North_America.zip for X-Plane 10. By Canada4XPlane.

X-Plane 10 And 11 Scenery--CYTE Cape Dorset 2.5. Cape Dorset Airport is located at Cape Dorset, Nunavut, Canada, and is operated by the Government of Nunavut. Turbo-prop aircraft are used and handled at this airport due to the runway surface and length. Requires the latest versions of the following libraries: JB Library (JB_LIBRARY.ZIP), MisterX Library (MISTERX_LIBRARY.ZIP) and OpenSceneryX (OPENSCENERYX.ZIP). By Canada4XPlane.