PierreDamienGaillard

Thank you for your feedback! I probably did not explained myself correctly sorry. My issue is when I try to substitute an aircraft in the compiler. Basically I change the name of all aicraft in the cfg file to keep consistency and to find myself better in this huge amount of datas and then I use the "substitute" option in the AIFP compiler to find my repaint. I do like this for all my aicrafts... and that works for all of them except those 2! Please see attached a print screen. In this print screen, this is my current way of doing and the G550's from Fox Corporation appear and I can "substitute" them. Until there all fine! When it comes to the G650, I don't find them in the list. I can't find any of the G650 from any repaint downloaded. This the same issue with the JBAI Challenger 600. I checked the flight plans. The others are also written with the same "R" and "0000" and they seem to be working in the Sim. (I did not check all of them one by one but I can see some planes in the Sim with this settings). I find all these FP at https://aibizjetproject.wordpress.com. Huge database of Private Jet FP. Thanks again for your time and support!

There you have! Downloaded like this from the website. G550 work just fine but the issue is with both G650. Thanks, Pierre. Aircraft_FoxCorporationSu19.txt Airports_FoxCorporationSu19.txt Flightplans_FoxCorporationSu19.txt

Just tried it but did not work either! All my cfg have aicrafts at the bottom. I did that myself. But they all work except those 2 new ones. I created the 2 new folders directly in the AI aircraft folder. Then I sent the base/p3d files to these created folders. For the the other aircrafts I directly downloaded from the developer base model. Could that come from here? issue with rights? if so I'm not sure what to look at as they seem to be the same than the others. Thanks again for your support!!

[General] atc_type=Gulfstream atc_model=GLF6 editable=1 performance=AI Aircraft Category=airplane [WEIGHT_AND_BALANCE] max_gross_weight = 20450.0 // (pounds) empty_weight = 12000.0 // (pounds) reference_datum_position = 34.5, 0, 0 // (feet) distance from FlightSim Reference position, which is: (1/4 chord, centerline, waterline) empty_weight_CG_position = -34.1, 0, 0 // (feet) longitudinal, lateral, vertical distance from specified datum max_number_of_stations = 50 station_load.0 = "170, -17.0, -1.2, 0.0, Pilot" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.1 = "170, -17.0, 1.2, 0.0, Co-Pilot" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.2 = "170, -22.5, -1.2, 0.0, Passenger 1" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.3 = "170, -22.5, 1.2, 0.0, Passenger 2" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.4 = "170, -26.7, -1.2, 0.0, Passenger 3" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.5 = "170, -26.7, 1.2, 0.0, Passenger 4" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.6 = "0, -30.9, -1.2, 0.0, Passenger 5" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.7 = "0, -30.9, 1.2, 0.0, Passenger 6" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.8 = "0, -35.1, -1.2, 0.0, Passenger 7" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.9 = "0, -35.1, 1.2, 0.0, Passenger 8" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.10 = "100, -42.0, 0.0, 0.0, Baggage1" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) station_load.11 = "50, -45.0, 0.0, 0.0, Baggage2" // Weight(lbs), longitudinal, lateral, vertical positions from datum (feet) ;Moments of Inertia empty_weight_pitch_MOI = 80000 empty_weight_roll_MOI = 80000 empty_weight_yaw_MOI = 90000 empty_weight_coupled_MOI = 0.0 [contact_points] static_pitch = -1.3 static_cg_height = 8.45 tailwheel_lock = 0 gear_system_type = 1 max_number_of_points = 3 point.0 = 1, 6.5, 0, -6.85, 20000, 0, 0.9, 60, 0.37, 2, 0.7, 5, 5, 0, 260, 260 point.1 = 1, -38.3, -7.65, -7.3, 20000, 1, 1.4, 0, 0.33, 2, 0.7, 6, 6, 2, 260, 260 point.2 = 1, -38.3, 7.65, -7.3, 20000, 2, 1.4, 0, 0.33, 2, 0.7, 6, 6, 3, 260, 260 [lights] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing //light.0 = 3, -50.41, -46.1, 0.44, fx_navredm //light.1 = 3, -50.41, 46.1, 0.44, fx_navgrem light.0 = 3, -81.1, 0, 15.95, fx_navwhih //light.3 = 2, -50.1, -45.8, 0.2, fx_strobeh //light.4 = 2, -50.1, 45.8, 0.2, fx_strobeh light.1 = 1, -37, 0, -4.0, fx_beaconh [electrical] max_battery_voltage = 12.0 generator_alternator_voltage = 13.8 max_generator_alternator_amps = 40.0 ;BusType, MaxAmpLoad, MinVoltage BusTypes:0=MainBus,1=AvionicsBus,2=BatteryBus,3=HotBatteryBus,4-7=Generator/AlternatorBus(1-4) avionics_bus = 0, 5 , 9.5 avionics = 1, 5 , 9.5 additional_system = 0, 2 , 9.5 marker_beacon = 1, 2 , 9.0 fuel_pump = 0, 5 , 9.0 [flight_tuning] cruise_lift_scalar = 1.0 parasite_drag_scalar = 1.0 induced_drag_scalar = 1.0 elevator_effectiveness = 1.15 aileron_effectiveness = 1.0 rudder_effectiveness = 1.0 pitch_stability = 2.0 roll_stability = 1.5 yaw_stability = 1.5 elevator_trim_effectiveness = 1.5 aileron_trim_effectiveness = 1.5 rudder_trim_effectiveness = 1.0 [GeneralEngineData] engine_type = 1 //0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop Engine.0 = -49.3, -7.6, 4.3 //(feet) longitudinal, lateral, vertical distance from reference datum Engine.1 = -49.3, 7.6, 4.3 //(feet) longitudinal, lateral, vertical distance from reference datum fuel_flow_scalar = 1.0 //Scalar for fuel flow efficiency min_throttle_limit = -0.00 //Minimum percent throttle. Generally negative for turbine reverser [TurbineEngineData] fuel_flow_gain = 0.0025 //Gain on fuel flow inlet_area = 4.2895 //Square Feet, engine nacelle inlet area rated_N2_rpm = 29920 //RPM, second stage compressor rated value static_thrust = 3500 //Lbs, max rated static thrust at Sea Level afterburner_available = 0 //Afterburner available? reverser_available = 0 //Thrust reverser available? [jet_engine] thrust_scalar = 1.0 [gear_warning_system] gear_warning_available = 1 //Normal pct_throttle_limit = 0.1 //Percent throttle that activates warning flap_limit_idle = 15.0 //Flap angle that activates warning at idle flap_limit_power = 30.0 //Flap angle that activates warning at above idle [brakes] parking_brake = 1 //Parking brake available toe_brakes_scale = 0.25 //Brake scalar [hydraulic_system] normal_pressure = 3000.0 //PSI electric_pumps = 0 //no electric pumps engine_map = 1,1,0,0 //pumps on Eng1,2 [Views] eyepoint = -16.385, -1.435, 3.012 [Effects] [flaps.0] type = 1 // 1 - tail, 2 - lead span-outboard = 0.8 // 0.0 .. 1.0 extending-time = 5 // seconds flaps-position.0 = 0 // degrees flaps-position.1 = 8 // degrees flaps-position.2 = 20 // degrees flaps-position.3 = 40 // degrees damaging-speed = 250 // KIAS blowout-speed = 300 // KIAS lift_scalar= 0.00 drag_scalar= 1.00 pitch_scalar= 0.00 [Radios] // Radio Type = availiable, standby frequency, has glide slope Audio.1 = 1 Com.1 = 1, 0 Com.2 = 1, 0 Nav.1 = 1, 0, 1 Nav.2 = 1, 0, 0 Adf.1 = 1 Transponder.1 = 1 Marker.1 = 1 [keyboard_response] //Breakpoint speeds (knots) on the keyboard increments of control surfaces. //Speed at which the incremenet is reduced to 1/2 and 1/8 respectively. elevator = 150, 250 aileron = 150, 250 rudder = 150, 250 [direction_indicators] //1 Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro, 3=Electro-Mag Slaved Compass, 4=Slaved to another //2 Indicator number of slaving indicator if Type = 4 direction_indicator.0=3,0 [attitude_indicators] //Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro attitude_indicator.0 = 2 attitude_indicator.1 = 1 [turn_indicators] //Type: 0=None, 1=Electric Gyro, 2= Vacuum Gyro turn_indicator.0=0,0 [fuel] Center1 = -41.4, 0.0, -1.5, 359.0, 0.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) LeftMain = -36.3, -10.0, -1.5, 268.5, 0.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) RightMain = -36.3, 10.0, -1.5, 268.5, 0.0 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) fuel_type = 2 //Fuel type: 1 = Avgas, 2 = JetA number_of_tank_selectors = 1 electric_pump=1 [airplane_geometry] wing_area = 389.0 //Square feet wing_span = 99.7 //Feet wing_root_chord = 9.9 //Feet wing_dihedral = 2.5 //Degrees wing_incidence = 0.5 //Degrees wing_twist = -1.5 //Degrees oswald_efficiency_factor= 0.8 //Measure of lift effeciency of wing wing_winglets_flag = 1 //Are winglets available? wing_sweep = 13.4 //Degrees, wing leading edge wing_pos_apex_lon = -31.5 //Feet, longitudinal distance from reference point, negative going aft wing_pos_apex_vert = 0.0 //Feet, vertical distance from reference point, positive going up htail_area = 67.0 //Square feet htail_span = 17.2 //Feet htail_pos_lon = -59.1 //Feet, longitudinal distance from reference point, negative going aft htail_pos_vert = 0.0 //Feet, vertical distance from reference point, positive going up htail_incidence = 2.0 //Degrees htail_sweep = 25.0 //Degrees, horizontal tail leading edge vtail_area = 42.0 //Square feet vtail_span = 7.4 //Feet, tip to body vtail_sweep = 30.0 //Degrees, vertical tail leading edge vtail_pos_lon = -55.0 //Feet, longitudinal distance from reference point, negative going aft vtail_pos_vert = 4.1 //Feet, vertical distance from reference point, positive going up elevator_area = 17.0 //Square feet aileron_area = 13.5 //Square feet rudder_area = 7.3 //Square feet elevator_up_limit = 17.0 //Degrees elevator_down_limit = 15.5 //Degrees aileron_up_limit = 18.0 //Degrees aileron_down_limit = 18.0 //Degrees rudder_limit = 30.0 //Degrees elevator_trim_limit = 15.0 //Degrees spoiler_limit = 60.0 //Degrees spoilerons_available = 0 //Spoilerons Available? aileron_to_spoileron_gain = 4.6 //Aileron to spoileron gain min_ailerons_for_spoilerons = 5 //Degrees min_flaps_for_spoilerons= 0.0 //Minimum flap handle position when spoilerons activate auto_spoiler_available=1 spoiler_extension_time=2.000000 positive_g_limit_flaps_up=3.000000 positive_g_limit_flaps_down=2.000000 negative_g_limit_flaps_up=-2.000000 negative_g_limit_flaps_down=-2.000000 [Reference Speeds] flaps_up_stall_speed = 102.0 //Knots True (KTAS) full_flaps_stall_speed = 92.0 //Knots True (KTAS) cruise_speed = 464.0 //Knots True (KTAS) max_mach = 0.87 max_indicated_speed = 340 //Red line (KIAS) [autopilot] autopilot_available= 1 flight_director_available= 1 default_vertical_speed= 1800.0 autothrottle_available= 1 autothrottle_arming_required= 0 autothrottle_max_rpm = 90 autothrottle_takeoff_ga= 0 pitch_takeoff_ga = 8; max_pitch=10.0 max_pitch_acceleration=1.0 max_pitch_velocity_lo_alt=2.0 max_pitch_velocity_hi_alt=1.5 max_pitch_velocity_lo_alt_breakpoint=20000.0 max_pitch_velocity_hi_alt_breakpoint=28000.0 max_bank=25.0 max_bank_acceleration=1.8 max_bank_velocity=3.00 max_throttle_rate=0.10 nav_proportional_control=11.00 nav_integrator_control=0.20 nav_derivative_control=0.00 nav_integrator_boundary=2.50 nav_derivative_boundary=0.00 gs_proportional_control=9.52 gs_integrator_control=0.26 gs_derivative_control=0.00 gs_integrator_boundary=0.70 gs_derivative_boundary=0.00 yaw_damper_gain = 1.0 [stall_warning] type=2 stick_shaker=1 [pitot_static] pitot_heat=1.000000 [vacuum_system] max_pressure=5.150000 vacuum_type=2 electric_backup_pressure=0.000000 engine_map=0,0,0,0 [pneumatic_system] max_pressure=18.000000 bleed_air_scalar=1.000000 [deice_system] structural_deice_type=0 [fltsim.0] title=Fox Corporation Gulfstream 650 N898NC sim=AI_G650 model= texture=Fox Corporation N898NC atc_id=N898NC ui_manufacturer=KCAI ui_type=Gulfstream 650 ui_variation=Fox Corporation N898NC atc_parking_codes=XJET atc_parking_types=RAMP [fltsim.1] title=Fox Corporation Gulfstream 650 N900NC sim=AI_G650 model= texture=Fox Corporation N900NC atc_id=N900NC ui_manufacturer=KCAI ui_type=Gulfstream 650 ui_variation=Fox Corporation N900NC atc_parking_codes=XJET atc_parking_types=RAMP [fltsim.2] title=Fox Corporation Gulfstream 650 N988NC sim=AI_G650 model= texture=Fox Corporation N988NC atc_id=N988NC ui_manufacturer=KCAI ui_type=Gulfstream 650 ui_variation=Fox Corporation N988NC atc_parking_codes=XJET atc_parking_types=RAMP [fltsim.3] title=Fox Corporation Gulfstream 650 N2702 sim=AI_G650 model= texture=Fox Corporation N2702 atc_id=N2702 ui_manufacturer=KCAI ui_type=Gulfstream 650 ui_variation=Fox Corporation N2702 atc_parking_codes=XJET atc_parking_types=RAMP

UTL is Ultimate Traffic Live from Flight1. I can't insert the 2 cfg files! It says "invalid file"! Anything related to the cfg files properties? Thanks for your help!!

Hi all, I hope this message finds you well and that someone will be able to help me. After having installed thousands of repaints for AI planes for airlines via UTL I'm now adding Business Jets with AIFP. I installed 2 new models in the regular "AI Aircraft" (KCAI Gulfstream 650 and JBAI Challenger 600) folder in the SimObjects folder where I have 128 other aircraft models all working well with UTL and AIFP. When I go to AIFP and substitute the flightplan aircrafts, these new repaints from these 2 new folders don't show. I still have all the others appearing. UTL does not recognize them either. I checked both Aircraft cfg files and in particular the fltsim.X sequence. They are ok. I don't understand what's causing these 2 new folders not being "read". My guess is that it's coming from the cgf files but I can't figure out what's the issue. Any help or suggestion would be highly appreciated! Thank you! Pierre.