Advanced Search Results

    [ New Search | New Advanced Search ]

    4,487 files match the search criteria.

    Search Keywords:

    Page 1 of 449 1231151101251 ... LastLast

    FS2004 (ACOF) - FS2004 Scenery
    FS9 Quesnel CYQZ in British Columbia Canada Updated
    [ Download | View | Video ]

    Name: quesnel_bc.zip
    Size: 10,321,416 Date: 11-28-2022 Downloads: 31

    FS9 Quesnel CYQZ in British Columbia Canada Updated This is a new upload of Quesnel as the first one was incomplete; my fault. Quesnel is around 65 miles south of Prince George, at the junction of the Fraser and Quesnel Rivers. It has a population of less than 10,000 and is reliant on the timber industry and tourism (hiking, canoeing, fishing, hunting) in the surrounding area for it's income. The date for this scenery is, once again, around 2010. The airport is on the northern edge of the town and has a runway of 5,500 feet aligned 13-31 with PAPI at both ends. Because of the surrounding terrain runway 13 has a right hand VFR circuit. Parking for GA aircraft is organised by the Quesnel Flying Club in a grassed area adjacent to the concrete and asphalt apron. Also adjacent to the apron is the extraordinary terminal building, and next to that is the comparatively very ordinary building that houses the flying club. There are also the usual airfield and plane maintenance buildings, and at the southern end of the runway two private hangars. There is also a Fire Base housing personnel that either drive from the base or fly by helicopter to deal with forest fires at ground level. The AI included here is for Central Mountain Air and GA. I added to and adjusted the CYXS AI so that there are GA flights between CYXS and CYQZ, so just replace your current CYXS AI with this new one. The video gives a good view on runway 13. By Roger Wensley
    Add Comment

    Prepar3D - Prepar3D Scenery
    P3D v4 Scenery--Ozamis Airport (RPMO) Photoreal
    [ Download | View | Video ]

    Name: rpmo_photoreal_p3dv4.zip
    Size: 142,131,200 Date: 11-25-2022 Downloads: 33

    P3D v4 Scenery--Ozamis Airport (RPMO) Photoreal P3D v4 Scenery--Ozamis Airport (RPMO) Photoreal. Ozamis Airport is an airport serving Ozamis City and other cities and municipalities in the province of Misamis Occidental, Philippines. This is an updated release of RPMO and is created with Google SketchUp, ModelConverterX, FSEarthTiles, and Airport Design Editor. By Zoom Morales/PFSG.
    1 Comments

    Prepar3D - Prepar3D Aircraft
    P3D WHITE LILLY OF STALINGRAD
    [ Download | View | Video ]

    Name: white_lilly_of_stalingrad.zip
    Size: 7,489,193 Date: 11-25-2022 Downloads: 18

    P3D WHITE LILLY OF STALINGRAD A Repaint of AF Scrub's YAK-1b to represent the plane flown by the "WHITE LILLY OF STALINGRAD" Lydia Litvyak. By age 21, Lilia had completed 268 missions and recorded 15 solo kills, including four German aces, with 22 assists - records which still stand to this day. Tested in FSX and P3D. Requires Yak-1_1B by AF Scrub. By Peter J Forster
    Add Comment

    FS2004 (ACOF) - FS2004 Scenery
    FS2004 Scenery--Prince George CYXS
    [ Download | View | Video ]

    Name: prince_george_bc.zip
    Size: 29,536,502 Date: 10-28-2022 Downloads: 111

    FS2004 Scenery--Prince George CYXS Prince George is centrally located in British Columbia, mid way between the border with the USA in the south and the northern border with the Northern Territories, and around 100 miles west of the eastern border with Alberta. The town now has a population of around 74,000 and is regarded as the province's northern capital. It is at the meeting point of the Fraser and Nechako rivers and the crossroads of highways 16 and 97. It started out as Fort George in the early 1800's when a trading post was established by the Northwest Company,serviced by paddle boats on the rivers. The railway arrived in the area in 1914 and growth continued, albeit slowly due to wars and the financial collapse of the 1930's. Timber and timber products were and still are the mainstay of the area. The date for this scenery is around 2010. I have made some new buildings from memory and the available information online. They are not totally accurate reproductions; for instance I know that the terminal building is brick faced and also has parts that are stone (or metal) faced, but where? As a result I used brick everywhere. The airport management team have continued to grow the activity and services provided with the result that flights and passenger numbers continue to increase. The 15-33 runway was lengthened to the south, (in the period 2003 to 2005) from the original FS9 scenery 7,400 feet to my updated 11,450 feet with central lighting and ILS at the northern end. This made it the third longest runway in Canada. At the same time a loading/unloading cargo area was created with professionally run storage and also a large scale fuel storage. If DHL want to refuel their 737 then they can do so without making prior arrangements. The AI included here is for Air Canada Jazz and an Air Canada 737, Westjet 737 and Dash8, a helicopter company that is based there, Pacific Coastal, Central Mountain Air, and GA. The range of airlines and planes reflects the "northern capital" status of the town. Video is not great, and I think perhaps from before the runway extension. By Roger Wensley
    5 Comments

    FS2004 (ACOF) - FS2004 Scenery
    FS2004 Scenery--Fort St John CYXJ in BC Canada
    [ Download | View | Video ]

    Name: fort_st_john_bc.zip
    Size: 40,760,798 Date: 10-05-2022 Downloads: 103

    FS2004 Scenery--Fort St John CYXJ in BC Canada Fort St John is close to the border between British Columbia and Alberta, around 40 miles north-northwest of Dawson Creek. The airport was originally a Royal Canadian Air Force base. It is currently named "North Peace regonal Airport", or "North Peace Airport"; apparently there has been no final decision? The date for this scenery is around 2006. I was given an old video tape cassette which was filmed on an uncertain date, but which had to be before the terminal building was renovated in 2007. The only way to view the video was to play it in the camera and watch it on a small screen. After I had completed everything except the buildings I started to view the video to establish the building appearances and within an hour or so the camera died. It was so old there was no way to repair it. I made some new buildings from memory of the video and what was available online. I also used some that I had already made for other scenery but which were similar. I may replace the terminal building this version with a build of the new one, as I know this one is not a very accurate reproduction. The replacement, if I do it, will be towards the end of this year. The AI included here is for GA, Air Canada Jazz, and two helicopter companies that were (and still are?) based there. One is at the western end of the apron and the other is at the eastern end but separated from the apron. To gain access to the taxiways and runways the eastern end helicopters just taxi across the grass. The helicopters are used for maintenance trips to the oil and gas fields in the surrounding area. My screenshots show Westjet at the terminal; this is because I have Canada-wide current AI installed, while the AI included here is only for the time around 2000 to 2010, when Westjet were not flying to Fort St John. The airport is square in plan, with the apron running along the northern side and two runways forming diagonals. The two runways are 11-29 (6,882 feet long and 200 feet wide, with ILS at the 29 enand PAPI at the other) and 02-20 (6,684 feet long and 200 feet wide, and with PAPI at each end). The eastern side taxiway that runs north-south is not used. The western side taxiway is in use but only as a race track for cars. Please email me if you find faults, such as a plane without textures. I cannot test scenery before I post it without making changes to my FS9 setup, which is potentially risky. Note my newish email address at the end of these notes. By Roger Wensley.
    1 Comments

    FSX - FSX Scenery
    FSX-LPMA-Funchal-Madeira
    [ Download | View | Video ]

    Name: fsx-lpma-funchal-madeira.zip
    Size: 74,919,878 Date: 09-18-2022 Downloads: 221

    FSX-LPMA-Funchal-Madeira FSX-LPMA-Funchal-Madeira well it starts as always, i can't find any usable freeware airport in this case for the LPMA Madeira Funchal so I'll build it myself again...............well what can i say here it is after a lot of work as real as possible with a lot of details with the Default scenery built ..........So fly to Madeira with an Airbus A321 or a Boeing 737, of course There youchange to a heli or a smaller plane and see each other on the premises at...... Installation: copy the folder LPMA-Madeira Scenery into the addon folder of the FSX, start the FSX go to settings, scenery library , add area, press ok , after that you can already start............ Extras: To be able to see people I deliver the file 3DPeoble_Lib with you can also put it in the Copy the addon folder and activate it in FSX as described during installation and you'll see you people..............the same applies to extra vehicles and extra buildings with the supplied files. ObjLib-Large-Car-Parking-FSX and you'll see more vehicles...........Airport_Restaurants_ss_fsx.BGL + RCS_Cobus3000.BGL! You don't need these extras if you already have them! Extra bonus: Especially for the LPMA-Madeira, I'm adding the Airport AI Enhancer program so that you can create your own AI traffic.........more about it on my Youtube channel https://www.youtube.com/channel/UC7vHXQMa3hhU2iGtODXlkHw/videos Support: Questions and help on my Youtube channel or by email to [email protected] Now have fun in Madeira Funschal Jamaika. By Ewald Wagner
    2 Comments

    FSX - FSX Other Aircraft
    FSX/Accel Swedish East Indiaman Sailing vessel Goetheborg 1745
    [ Download | View | Video ]

    Name: eastindiaman_goetheborg.zip
    Size: 11,497,476 Date: 09-07-2022 Downloads: 84

    FSX/Accel Swedish East Indiaman Sailing vessel Goetheborg 1745 The swedish East Indiaman Götheborg sailed in March 1743 to China. When she returned in Sweden in September 1745, allready close to the harbour, she ran on a rock and sank. The incredible valuable cargo of silk, tea and porcelane went lost. No information about the crew losts. In October 2005 a rebuilt replica did again a journey to China and returned successfully to Sweden some time later. The Götheborg is nowadays the largest wooden ship worldwide. The Sim-model reflects the old armed cargo vessel which carrieed up to 30 cannons and differs a bit from the replica with only ten longguns. It is almost complete rigged with hundreds of ropes and has ten animated guns. Twentysix cameras let you explore the whole ship: The decks and you can enjoy the sailors views from high above in the masts. The effects allows you to fire broadsides to starboard and port seperatly. The model should run in P3dV3 and in FS2004 but it is not tested and no support is given. FSDS 3.5 model made by Erwin Welker
    Add Comment

    FSX - FSX Helicopters
    FSX Trinidad and Tobago Air Guard MBB Bo105 NOC-04
    [ Download | View | Video ]

    Name: ttagbo105noc04.zip
    Size: 9,059,564 Date: 09-07-2022 Downloads: 22

    FSX Trinidad and Tobago Air Guard MBB Bo105 NOC-04 This livery is created for the Payware Nemeth Designs Bo105 helicopter. This specific helicopter can only be seen on the twin island of Trinidad and Tobago engaging in Miliary and Police operations. By Andre Noreiga
    Add Comment

    FS2002 - FS2002 Aircraft
    FS2002 Douglas C-124 Globemaster II Rudolph
    [ Download | View | Video ]

    Name: douglas_c-124_globemaster_ii_rudolph.zip
    Size: 2,686,575 Date: 08-14-2022 Downloads: 76

    FS2002 Douglas C-124 Globemaster II Rudolph. New FSDS2 version C124UAG2.ZIP. Douglas C-124 C Globemaster II, USAF, Utah Air Guard (UAG), registration 0-20976. For FS2002 With FS Design Studio Version 2.10 complete reworked and improved model. Features full animated moving-parts with rolling wheels, suspension, steerable nose gear, new animated cargo-doors, new animated ramp, new light animation, reflective textures (and the copilot has a rotatable head...). Base design (with FS Design Studio 1.5/1.6) by Arik Hohmeyer Complete rework and design additions (with FS Design Studio 2.10 and Aircraft Container Manager) by Chris Grabow Textures: Arik Hohmeyer, reworked by Chris Grabow airfile (flight dynamic), based on Dave McQueen, modified by Wolfram Beckert Paneldesign (PP.1d): Chris Grabow and Arik Hohmeyer (with Custom Panel Designer 2.0) with parts/gauges from the DC-4-6 panel by Brian Horsey (based on original panel Petros Protopapas and Stephen Grille and later modified by Tom Gibson). This panel was designed according to a photo by Dick Madison.
    Add Comment

    FS2004 (ACOF) - FS2004 Warbirds
    FS2004 Boeing B-17 Flying Fortress Nine-0-Nine In Memory
    [ Download | View | Video ]

    Name: boeing_b-17_flying_fortress_nine-0-nine_in_memory.zip
    Size: 3,978,786 Date: 07-14-2022 Downloads: 256

    FS2004 Boeing B-17 Flying Fortress Nine-0-Nine In Memory. This is a repaint in memory of Nine-0-Nine. Full and complete credit goes to Lennart "Mr.Mugel" Biermann. In memory of Nine-0-Nine and those aboard who perished on october 02, 2019 may they all rest in eternal peace... I added a black stripe on the right upper wing next to 9-0-9's "A" logo and I also made a memorial section in the front right side fuselage with 7 candles representing the 7 lives lost in the tragedy including the date of the occurance. Thank you Nine-0-Nine for serving our country for so many, many years. You will truly be missed. Rest Peacefully. By Georgette Kostopoulos.
    1 Comments

    Page 1 of 449 1231151101251 ... LastLast

    [ New Search | New Advanced Search ]

    File Library Icons:    Complete aircraft with model, panel, sound Aircraft base model from original designer Artificial Intelligence (AI) Aircraft