• Interview: Gottfried Razek and Joop Mak BlueSkyScenery

    Interview: Gottfried Razek and Joop Mak BlueSkyScenery

    Conducted by Dominic Smith

    Development

    When did you start developing for flight simulators and what got you interested in it?

    I first started developing for MSFS way back in 2001 when I did my first photoscenery experiments. Back then there were not as many photoreal sceneries as there are today, and I was totally fascinated by the idea of flying over real world terrain. I will never forget the wow effect when I loaded my first scenery into FS2004. I've been hooked ever since then. My good friend Joop, who I develop my sceneries with, started a year before me (2000) making scenery adjustments.

           

    Tell us about the nature of your designs and what you do?

    As mentioned, Joop is the other member of the team, and he creates all our airports. The airports are very important because most of the time the layout of the default airports don't match that of the real world, which causes double or misaligned runways. He also brings a little life to the otherwise empty default airports by placing all kinds of objects. This makes a huge difference as an airport should feel alive. Over the years Joop has made more than 1000 airports which if you think about it, is quite awesome and an amazing feat. Myself, I create the photosceneries and the elevation mesh.

    What do you consider your best or most popular work?

    That's hard to say. We think most of our sceneries covering large cities like Los Angeles, San Francisco, Phoenix or Salt Lake City are the most popular. However, sceneries covering scenic areas like the Canyonlands, Glacier or Grand Canyon and all our other National Parks are also very popular.

           

    What do you find to be the most challenging aspect of a project?

    The most challenging aspect is to get the colors right. Most of the time the colors in the original aerial imagery are not correct and often there are abrupt changes. We try to eliminate all of that so as to achieve as smooth and realistic flying experience as possible. In areas with many lakes or coastal areas, defining water bodies is also a challenge. In this case, you have to define an alpha channel that matches the textures to a couple of pixels so as to make them look good and believable. With large waterbodies or coasts you also have to define a blend channel for a smooth transition to the default water.

    Yes, a lot of photographic sceneries suffer from having textures of different shades, so how do you go about about fixing that?

    As I already said, this is often the greatest challenge. We do not just pull the imagery and throw it into the resampler. Most of the time we do a lot of image processing to get colors, saturation, brightness and contrast right. Sometimes we do a whole area twice.

    For Joop, large airports are a real challenge, as not only does he have to adjust all the runways, taxiways and buildings, but he also has to adjust the information so that the AI traffic behaves correctly.

           

    What have been your favorite projects?

    My personal favorite probably is the Canyonlands area, but I like all the national park sceneries we have created.

    What software packages and tools do you use to develop?

    Joop uses ADE165, developed by Jon Murchison (ScruffyDuck) to create his airport improvements. To minimize the impact on frame rates, he only uses default objects from the FS library. For myself, I use mostly Photoshop and programs from the FSX SDK. I also use a couple of small utility programs that I wrote myself and which aid me with my work.


    28 Comments
    1. bertnm's Avatar
      bertnm -
      I look forward to each new release from Blue Sky! Excellent scenery, and runs nicely on my older computer. No blurries and great frame rates.

      Keep up the excellent work!!!
    1. brigs2381's Avatar
      brigs2381 -
      AMAZING scenery guys, I have always steered clear of photoscenery because I thought I would miss auto-gen....boy was I wrong... I can't believe what I was missing out on....My flightsim experience just got upgraded to the "phenomenal" category and so far I have only downloaded half of California. I will definitely be donating to you guys; Thank you for ALL the work you guys put into this awesome scenery
    1. buscaviones's Avatar
      buscaviones -
      I have installed almost the entirety of the state of California part of Nevada and will install the available areas of utah if I still have room on my disk, I am fascinated with this wonderful scenery, It wont bother my frames in any ways.Now i feel like a real pilot flying on a true non-invented scenery.....thanks so much for your great job.
      Harry.
    1. Carob's Avatar
      Carob -
      Quote Originally Posted by scottharmes6 View Post
      5 out of 14 comments are you complaining about a FREEWARE scenery. If you do not like it or it doesn't run well on your system, then uninstall it. Problem solved.
      I am back at this again. (See earlier posts for description.) And just to clarify, I'm not complaining. Simply trying to figure out the problem.

      I have since changed out my system to an i7-2600 with a brand new GTX 1060 6GB video card and still have the scenery blurring out on me after a bit of time. (Although a bit longer of a time than before.) I can't figure out why this is happening.

      Any help would be greatly appreciated!
    1. DominicS's Avatar
      DominicS -
      Quote Originally Posted by Carob View Post
      I am back at this again. (See earlier posts for description.) And just to clarify, I'm not complaining. Simply trying to figure out the problem.

      I have since changed out my system to an i7-2600 with a brand new GTX 1060 6GB video card and still have the scenery blurring out on me after a bit of time. (Although a bit longer of a time than before.) I can't figure out why this is happening.

      Any help would be greatly appreciated!
      Please use the forums for technical support.

      Thanks

      Dominic Smith
    1. envoyair3371's Avatar
      envoyair3371 -
      When you have these sceneries does it override the lights at night? Is there a way to fix that?
    1. b3burner's Avatar
      b3burner -
      To those having overload issues, one idea might be to only use as many scenery "tiles" (areas) that you need at one time, to fly one flight plan. You don't need all of California loaded, if you're only flying within a small part of Idaho. Nothing to stop you from downloading and installing them all on the C-drive within the Addon Scenery folder; but maybe separate them out so that in the scenery library you have the option of only check marking the ones you'll be needing at that moment. (Just a thought).
    1. b3burner's Avatar
      b3burner -
      What happened to the blue sky scenery downloads for FS2004? I only managed to get one tile back in January 2014, and the op says that all the sceneries are FSX and P3D only. When was this change made, and were the old FS9 files purged? Where might I be able to access those again? Or can the FSX tiles be used in FS9?
  • Recent Forum Activity

    Kirk

    Would a high end GPU improve FSX?

    Thread Starter: Kirk

    I'm thinking about buying a dedicated computer for flight simming (is "flight simming" the right term?). Mainly because I'm currently using my little...

    Last Post By: johnost Today, 03:44 AM Go to last post
    oneleg

    REX or Hifi software licensing -ok to install in laptop and later to my new desktop?

    Thread Starter: oneleg

    I'm thinking of buying Opus and REX4 Texture Direct with Soft Clouds... Or software from Hifi. Can't decide whether I should buy their Active Sky...

    Last Post By: tgon Today, 03:35 AM Go to last post
    johnost

    New WW2 Flight Simulation released

    Thread Starter: johnost

    OBD Software - maker of the "Over Flanders Fields" WW1 sims - has announced the release of "Wings over the Reich" for WW2. This is a limited release...

    Last Post By: Boisevelone Today, 02:43 AM Go to last post
    widgy

    Course Select in FSX lear 45

    Thread Starter: widgy

    Where is the Course Select knob in the Default Lear 45 panel? I've looked for an hour on the 2D and 3D panels and can't find it. Thanks for any...

    Last Post By: CRJ_simpilot Today, 01:00 AM Go to last post