• Prepar3D

      FlightSimDesign Chile - SACO Ingeniero Ambrosio Taravella Airport for P3D

      FlightSimDesign Chile expands their range of Prepar3D scenery with the release of SACO Ingeniero Ambrosio Taravella Airport in Argentina. Serving the Cordoba area, the airport features terminal, edge and approach lights, 3D taxiway with signs, photoreal ground, dynamic real objects, etc.

      September 30, 2020, 11:15 am

      FSX/P3D POSKY 747-100 v4 Native Conversion Released

      Announcing the release of the Project Open Sky 747-100 v4 Native Conversion Base Pack for FSX/P3D. One of the classic jetliners from the famous POSKY group has been officially converted to work with FSX and Prepar3D. This is freeware and available from the FlightSimCom file library.

      September 29, 2020, 12:55 pm

      Golden Age Simulations - Aeronca LC for FSX/P3D

      Golden Age Simulations expands their range of vintage light aircraft for FSX/P3D with the release of the Aeronca LC. This cabin class monoplane was built in small numbers in the 1930's and featured a radial engine, streamlining and a cantilever low wing. Both land and float plane versions are included, with high-res textures, fully animated cockpit, custom sound, etc.

      September 28, 2020, 4:20 pm

      DC Designs Concorde - The Legend Flies Again!

      The new P3D/FSX Concorde developed by DC Designs features a highly detailed 3D model based on extensive research and visits to museum-exhibit aircraft, with a fully animated exterior model including all access doors, engine inlet ramps, thrust-reverse buckets and control surfaces.

      September 28, 2020, 3:06 pm

      Flight1 Releases Prepar3D v5 Versions of Ultimate Terrain

      Flight One Software and Scenery Solutions have released Prepar3D v5 installers of all v2 editions of Ultimate Terrain. Ultimate Terrain is an excellent product if you are wanting to make P3D v5 as visually accurate as possible. Roads, Rivers, Streams, Landclass, Waterclass, and more is packed into Ultimate Terrain.

      September 28, 2020, 11:23 am

      New France VFR Product: Poitou-Charentes VFR 3DA

      France VFR announces the release of a new scenery of Poitou-Charentes VFR 3DA for Prepar3D v4 and v5. This regional scenery includes many airports and cities. It features enhanced ground textures, high definition mesh, obstacle and VFR landmarks plus many other objects and buildings integrated into the environment.

      September 26, 2020, 3:45 pm

      Perfect Flight – FSX Missions – A321 Delta Airlines FSX/P3D

      New from Perfect Flight is FSX Missions - A321 Delta Air Lines which is actually for both FSX and Prepar3D. Included is an A321 that you will fly in a variety of realistic airline missions. Missions include briefings, cabin prep, step by step checklists, crew announcements and much more. Missions are customizable and can also be flown with other aircraft.

      September 26, 2020, 11:18 am

      AUscene Updates Adelaide International

      AUscene announces the release of Adelaide International X, version 2.2. This update is free to existing customers. The scenery is now compatible with all versions of Prepar3D. It features dynamic night lighting, GSX support, SODE jetways, detailed terminals and airbridges and much more.

      September 26, 2020, 10:13 am

      Just Flight Traffic Global FSX/P3D Ready Soon

      Just Flight continues to work on Traffic Global for FSX and Prepar3D and expects it done with early access and out as a full release very soon. When that happens they will be supplying a bonus set of general aviation aircraft liveries for users; today's announcement shows a selection of them.

      September 24, 2020, 10:36 am

      FlyTampa Previews Sydney V2

      Scenery developer FlyTampa has released some new screen shots of their upcoming Sydney Kingsford Smith V2 package. They report this will be ready "very soon" for Prepar3D v5 and that an MSFS 2020 version is also coming shortly, along with other airports.

      September 23, 2020, 2:47 pm

      Orbx - Welcome to TrueEarth Southern California for P3Dv4+

      TrueEarth Southern California, the final addition in the Orbx range of TrueEarth US regions for P3D, is coming soon, completing the US west coast The TrueEarth series represents innovative technology combined with relentless hard work to provide a truly realistic representation of the area.

      September 23, 2020, 10:04 am

      Just Flight/DC Designs Concorde Update

      Last we heard, the Concorde being created for P3D by DC Designs was ready for release, but today publisher Just Flight has released some more teaser screen shots, all taken in Prepar3D v5. It's still described as "soon to be released".

      September 23, 2020, 9:50 am

      CR1-Software Announces Fall Sale

      CR1-Software announces a fall sale with big savings on their two aircraft available for FSX and Prepar3D. They offer the Ford Tri-Motor and the Aeronca Champ for only $8 versus the normal $36. Check out these great looking planes now at the FlightSim.Com Store.

      September 22, 2020, 5:56 pm

      FlightSim.Com And DigitalThemePark Announce Partnership

      Today FlightSim.com would like to announce a partnership with DigitalThemePark. While we offer a wide variety of services to flightsimmers, DigitalThemePark adds additional services like VoIP, planned flights, achievements and education to expand your flightsimming fun. You will regularly see more as we promote DigitalThemePark events and other activities.

      September 21, 2020, 6:00 pm

      Review: Milviz T-38A Talon Redux

      With a name like Milviz you'd expect high quality military aircraft add-ons. According to reviewer Dale Ashcroft that's just what Prepar3D v4 pilots will get with the T-38A Talon Redux. This "study level" supersonic trainer is great looking and well modelled, much fun and challenging to fly.

      September 21, 2020, 3:58 pm

    • FlightSim.Com Newsletter Signup

      Get the Latest News, Reviews, Special Offers & More. We Never Share Your Email Address.
    • Prepar3D Recent Forum Activity

      kevinfolsom

      Flight Yoke Button Assignments

      Thread Starter: kevinfolsom

      Just a quick question. Every time I fire up P3DV4.5 I find my Alpha Flight Yoke and my Logitech Flight Throttle Quadrant button and axis assignments...

      Last Post By: kevinfolsom 09-28-2020, 03:25 PM Go to last post
      oneleg

      Reality XP - how to turn on the GNS 530.

      Thread Starter: oneleg

      Does anyone know if the Power on button on the GNS 530 and the 430 work in the virtual cockpit? There are no instructions on the User's Manual and...

      Last Post By: mallcott 09-21-2020, 04:41 AM Go to last post
      webdog

      Flight planner for Prepar3D

      Thread Starter: webdog

      Guys Is there a decent flight planner operating on the KIS Principle for Prepar3D Thanks Peter Jones

      Last Post By: kevinfolsom 09-19-2020, 12:40 PM Go to last post
      Offscheddescent

      Am I the only one still using (and liking) V4.5?

      Thread Starter: Offscheddescent

      After spending a couple of weeks on the new MSFS2020, I am still going to be using v4.5 A LOT. The scenery isn't sexy but the PMDG 737-700 expansion...

      Last Post By: mallcott 09-07-2020, 06:33 PM Go to last post
      retnavycpo

      Question about specs to run Version 5?

      Thread Starter: retnavycpo

      Ok. I have a friend who lives just north of Murphy, NC, and cable internet is not available; nor is satellite access. The only way he can get...

      Last Post By: Luke 08-26-2020, 04:46 PM Go to last post
      Bobp

      P3dv5 - 'The operating system is not configured to run this application'

      Thread Starter: Bobp

      I just starting getting this message which blocks p3dv5 from starting. Has anyone else ever seen this before? Thank you in advance. Bob

      Last Post By: lnuss 08-26-2020, 02:54 PM Go to last post
      kwi

      Simple question to v4/v5 user

      Thread Starter: kwi

      Hi all, is SW (aircraft/scenery) released for v5 also working in v4, or those are very different versions? Tks for your reply Peter

      Last Post By: kwi 08-26-2020, 06:10 AM Go to last post