SimSupervisor Posted July 22, 2015 Posted July 22, 2015 Greetings, most of my research online lead to pictures or videos of people with a home cockpit with only one yoke. Most aircraft have two yokes wich are in-sync. Are there any methods for achieving that? Thanks a lot for any ideas or suggestions.
Billd Posted July 23, 2015 Posted July 23, 2015 You may want to look at the "similar threads" section below.
SimSupervisor Posted July 23, 2015 Author Posted July 23, 2015 You may want to look at the "similar threads" section below. I see no "similar threads" Perhaps I am not in the proper place, I thought this section was populated by people who build their own cockpits.
mrzippy Posted July 23, 2015 Posted July 23, 2015 I see no "similar threads" Perhaps I am not in the proper place, I thought this section was populated by people who build their own cockpits. Still thinking about a new flightsim only computer!
SimSupervisor Posted July 23, 2015 Author Posted July 23, 2015 [ATTACH=CONFIG]181406[/ATTACH] It's NOT there
Billd Posted July 23, 2015 Posted July 23, 2015 Scroll down to the BOTTOM of THIS page. You will see a large blue icon that says "Reply to Thread" Look BELOW that and you will see "Similar Threads."
SimSupervisor Posted July 24, 2015 Author Posted July 24, 2015 Scroll down to the BOTTOM of THIS page. You will see a large blue icon that says "Reply to Thread" Look BELOW that and you will see "Similar Threads." Don't you see I am on a cell phone using tapatalk?
SimSupervisor Posted July 24, 2015 Author Posted July 24, 2015 Just forget it..... Yeah, that's what I said earlier.
SimSupervisor Posted July 24, 2015 Author Posted July 24, 2015 Perhaps I am not in the proper place, I thought this section was populated by people who enjoy talking about building their own cockpits. That, more precisely
ricardo_NY1 Posted July 24, 2015 Posted July 24, 2015 The only way I've ever seen it done is through bicycle style chains and sprockets. Each yoke basically has a sprocket and chain that interacts with the sprocket of the other yoke. Designs and mechanisms for this vary. Use the keywords "Simulator linked yokes" to do an image search online. You'll at least get some ideas. This is either a DIY project if you have the skills or something you'd have to outsource, perhaps bring in someone with some engineering knowledge in, even if it's a self taught kind of person. Ricardo FSThrottle.com
jamesdeburghe Posted July 25, 2015 Posted July 25, 2015 The only yokes I have seen synchronised without mechanical coupling are those sold by simkits
ricardo_NY1 Posted August 8, 2015 Posted August 8, 2015 The only yokes I have seen synchronised without mechanical coupling are those sold by simkits Do you have a link to that? I've never seen a linked/sync'd yoke system without some sort of mechanical system behind it. The only other things that comes to mind would be some sort of stepper motor system but that would be more complex and drive up cost so it doesn't make much sense to use over a mechanical solution using some welded components and chains. Ricardo FSThrottle.com
Billd Posted August 8, 2015 Posted August 8, 2015 I have a C-182 cockpit from Flight Illusions with dual FFB Cessna yokes.Though they are seperate modules each is interconnected by software and work in unison. The Cessna yoke modules cost about $1,600 each. Flight Illusions yokes can be viewed on You Tube. The rep can be contacted: Mark at FlightIllusion.com The Simkits yokes are in kit-form and cost about $600 each. it is possible for them to be mechanically interconnected by purchasing a Cessna Y-weld which is sometimes available on ebay which cost about $1,000 The Simkits rep is: joost.meijeren at trcsimulators.com
ammarmalhas Posted November 29, 2015 Posted November 29, 2015 If u mean u want the two yokes to move in unison, it cannot be done without mechanical attachment that practically make them one yoke, or without shelling out a few thousand dollars on a proposal as above. If u want the two to work in FSX/P3D then define each in FSUIPC, see the manual or advanced manual, it is "fairly" simple. Good luck. Sent from my iPad using Tapatalk
Recommended Posts
Archived
This topic is now archived and is closed to further replies.