dorianr Posted January 29, 2018 Share Posted January 29, 2018 It happen random, flying normal, then land it's ok, next at departure, they will not airborne. if use the slew and put the plane up to over 4,000 feet, will just fall like a rock : I have a FB Page to publish good Download from FSXSIM Page. If you take a pick what it does at take off. Thanks for any information to this matter https://www.facebook.com/564546310310550/videos/1450649085033597/ This other Video shows another normal take off : https://www.facebook.com/564546310310550/videos/1439970556101450/ Link to comment Share on other sites More sharing options...
f16jockey_2 Posted January 29, 2018 Share Posted January 29, 2018 Imo the 1st video shows a tailstrike (by lifting the nose prior to Vr). Wim Link to comment Share on other sites More sharing options...
jorgen.s.andersen Posted January 29, 2018 Share Posted January 29, 2018 Definitely a tail strike, and a severe one, lasting for quite some time. Just look at the smoke trail behind the aircraft. There is no problem lifting the nose before Vr, except that you "gain" a lot of drag and probably will have difficulty reaching Vr, but this is way too much. Plus a real-life pilot would know that he has a tail strike and lower the nose at once. Jorgen Link to comment Share on other sites More sharing options...
mallcott Posted January 29, 2018 Share Posted January 29, 2018 Need to spend time comparing v-speeds with weight. Link to comment Share on other sites More sharing options...
mrzippy Posted January 29, 2018 Share Posted January 29, 2018 Gee, too bad that your videos are posted to Faceplant. Limits your viewers and help. Like the others have suggested, build your takeoff speed before yanking the stick/yoke back. Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
dorianr Posted January 29, 2018 Author Share Posted January 29, 2018 Exactly as you suggest, but on that video it was reaching over 160 kts an I finally got frustrating with the FSX, and I did burn the tail so I abort it. also the next video shows a large 744 take off with out problem all starts with the FedEx, (only at first time) see the Next video the FedExp it's normal It happens not only with heavy aircraft but also including with light Aircraft. (I did mention too that also I have after this problem occurred with the aircraft, I put on slew (Y) thinking it just my error, I bring the plane up over the clouds enough time for me to reach going down in vertical speed over 280 kts falling from 10,000 feet, but it just "not" fly at all, it simple us I drop a "car" the only way to back to normal is change plane and using any default plane, testing if it does take off and flight normally and that will solve the problem, also shut the FSX and starts all over, but sometime will do it again. Also let me quote, it happens with some new Downloads. not with the default FSX Planes. I have a back up copy of the FSX config on the roaming dir. which I used many times to restore the "big†Problem that I have and I mentioned in previously post to this forum concerned to the blurry letter on the ATC window, that appears on me after a new plane installed, recently I found the problem that it's originated by a “Gouge Trust Installation" form some FS4/FSX planes, and reset the back up it probably fix the take off issue too, so now I compare bad and original fsx config file and check the new adds , but it will take time to find out which plane does the config error (to many planes on my dir) . That’s way I come to you forum and maybe I can get a clue. Thank you anyway You are greate person to help all and many newest simmers. Me for an old 1981 MS simmer, I getting old. but I love it, real or in my desk Link to comment Share on other sites More sharing options...
mallcott Posted January 29, 2018 Share Posted January 29, 2018 Exactly as you suggest, but on that video it was reaching over 160 kts an I finally got frustrating with the FSX, and I did burn the tail so I abort it. also the next video shows a large 744 take off with out problem all starts with the FedEx, (only at first time) see the Next video the FedExp it's normal It happens not only with heavy aircraft but also including with light Aircraft. (I did mention too that also I have after this problem occurred with the aircraft, I put on slew (Y) thinking it just my error, I bring the plane up over the clouds enough time for me to reach going down in vertical speed over 280 kts falling from 10,000 feet, but it just "not" fly at all, it simple us I drop a "car" the only way to back to normal is change plane and using any default plane, testing if it does take off and flight normally and that will solve the problem, also shut the FSX and starts all over, but sometime will do it again. Also let me quote, it happen with some new Downloads. not with the default FSX Planes. I have a back up copy of the FSX config on the roaming dir. which I used many times to restore the "big†Problem that I have and mention in previously post to this forum concerned to the blurry letter on the ATC window, that appears after a plane install, recently I found the problem its originated by a “Gouge Trust Installation form some FS4/FSX planes, and it probably fix the take off issue too, so now I compare bad and original fsx config file, but it will take time to find out which plane does the config error. That’s way I come to you forum for maybe I can get a clue. Thank you anyway You are grate person to help the many newest simmers. Me for an old 1981 MS simmer, I getting old Probably didn't check v-speeds with weight, as I said. You might also check you haven't got the a/p engaged on the ground; that will result in full nose-down trim. Link to comment Share on other sites More sharing options...
mrzippy Posted January 29, 2018 Share Posted January 29, 2018 Try adding a little elevator pitch on your next take off. Lift off should be around 120 knots depending on how much fuel you have on board. Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
f16jockey_2 Posted January 29, 2018 Share Posted January 29, 2018 Try adding a little elevator pitch... I'm sure you mean "elevator trim". Wim Link to comment Share on other sites More sharing options...
mrzippy Posted January 29, 2018 Share Posted January 29, 2018 I'm sure you mean "elevator trim". Wim I'm sure I do!;) Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.