Kdierken Posted March 31, 2016 Share Posted March 31, 2016 I just downloaded this freeware Beechcraft Volpar. There are several repaints, it comes with two repaints I added alaska_volpar.zip I think for a freeware plane, this is a nice one to add to your hanger. Type Volpar.zip in file under FS9 general aircraft. Sorry I don't know to hyperlink this directly. When looking out the cockpit window you see port wing and a little bit of the left engine nacelle, if you hat around you can see other parts such as passenger seats. It has VC for the pilots out there that like that type. Nice panel as well. You must put the gauges in the gauges file or it won't work, put effects into effects folder. Try it out. My hat goes out to the guy's out there that give us nice freeware planes. See attachment. Kenny:) Link to comment Share on other sites More sharing options...
Rupert Posted April 1, 2016 Share Posted April 1, 2016 Beautiful Plane Kenny! And the price is right too! thanks for putting it up to view.;) Being an old chopper guy I usually fly low and slow. Link to comment Share on other sites More sharing options...
adamb Posted April 1, 2016 Share Posted April 1, 2016 Very nice Kenny, that is such a great looking plane, great shots of her!! :) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
lifejogger Posted April 1, 2016 Share Posted April 1, 2016 Great looking plane and nice shots of it. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
PhantomTweak Posted April 1, 2016 Share Posted April 1, 2016 Awesome paint job, and I just LOVE that cockpit! Many of those gauges I use in a lot of different birds. Thanks for hte upload! Pat☺ [sIGPIC][/sIGPIC] Had a thought...then there was the smell of something burning, and sparks, and then a big fire, and then the lights went out! I guess I better not do that again! Sgt, USMC, 10 years proud service, Inactive reserve now :D Link to comment Share on other sites More sharing options...
peer01 Posted April 1, 2016 Share Posted April 1, 2016 The Volpar is a "must have", good looking pics Kenny! :cool::cool::pilot: Here's the FS9 link https://www.flightsim.com/vbfs/fslib.php?do=copyright&fid=81441 There's also a fix and there's an FSX upgrade in the libraries.:) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
KCD Posted April 1, 2016 Share Posted April 1, 2016 This is a wonderful flying airplane. I've had it for several years, and at one time it was all I flew. I did modify the panel somewhat to better suite my flying, nothing drastic, just more complete. The panel modifications were done in 2010... //This Panel.cfg file created by CfgEdit // Built Tuesday, November 09, 2010 at 12:08 Build:15090. Cfgedit is a freeware product that remains available at some flightsim sites. It has been rumored not to work in FS2002, FS9, and FSX, but I have no difficulty with it and use it for all of my panel mods and my new. from scratch new panels. Great selection, Kenny! Link to comment Share on other sites More sharing options...
wolf2 Posted April 1, 2016 Share Posted April 1, 2016 cool! i had one for fs2000, hadnt thought about it since then. good shots! Phil Colvin Link to comment Share on other sites More sharing options...
Kdierken Posted April 1, 2016 Author Share Posted April 1, 2016 Too many to thank, but I am appreciated for all the responses. KCD I like the panel that you are showing, how can I get it? I looked it up and it does not come up. If not I can live with the original one. I enjoyed flying it, as for a private aircraft. Kenny Link to comment Share on other sites More sharing options...
NMLW Posted April 1, 2016 Share Posted April 1, 2016 A fine aircraft Kenny, nice panel to go with it. :cool: :) Larry Link to comment Share on other sites More sharing options...
mrzippy Posted April 1, 2016 Share Posted April 1, 2016 Great shots, Kenny! A definite keeper! Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Kdierken Posted April 1, 2016 Author Share Posted April 1, 2016 Mr.Zippy glad you like it. I am sure you saw the repaints that goes with it plus the ones it comes with. Not bad for freeware. Kenny Link to comment Share on other sites More sharing options...
Firefalcon Posted April 9, 2016 Share Posted April 9, 2016 Hmmm [sIGPIC][/sIGPIC] Desktop: Cybertron AMD cpu, Nvidia GeForce GTX 1050 2GB GDDR5 , MS Windows 10 DirectX 12, ASUS 24" 1920x1080. Thrustmaster T.Flight Hotas 4 (a since 10:43 PM 7/24/2018). New 2019 "PATRIOT" Memory VIPER DDR3 8GB x2 XMP2.0 FSX SE "FOR FSIM USE ONLY" Link to comment Share on other sites More sharing options...
Harald Haukland Posted April 10, 2016 Share Posted April 10, 2016 nice shots. you said freeware, were do i download this from then? Does this work with P3D too? http://www.speedtest.net/result/4450194567.png Asus Z170-A-1151 - intel i7-6700K@4GHz - Asus ROG NVidia GTX 1050 TI Strix 4GB - 32GB HyperX DDR4@2400 MHz - Corsair CM750-750W - Corsair H80i v2 Watercooling Link to comment Share on other sites More sharing options...
mrzippy Posted April 10, 2016 Share Posted April 10, 2016 nice shots. you said freeware, were do i download this from then? Does this work with P3D too? beechcraft_model_18_volpar_package.zip In our Library. All you can do it try it for P3D. Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Kdierken Posted April 11, 2016 Author Share Posted April 11, 2016 Thanks mrzippy for answering that for me. Thanks Harold, firefalcon for your responses, I believe for freeware it is worth it I can never from to time give praise to the generators of freeware be it airports or A/C's. My cowboy hat off to you people who gives us free downloads. Kenny Link to comment Share on other sites More sharing options...
PhantomTweak Posted April 11, 2016 Share Posted April 11, 2016 I'm afraid I must agree with Kenny! Freeware designers, Airports, scenery in general, boats, aircraft, gauges, you name it! Without them, MSFS would be much much less for those of us on very limited budgets! A Huge vote of gratitude to them all! Past, present, future :D Pat☺ [sIGPIC][/sIGPIC] Had a thought...then there was the smell of something burning, and sparks, and then a big fire, and then the lights went out! I guess I better not do that again! Sgt, USMC, 10 years proud service, Inactive reserve now :D Link to comment Share on other sites More sharing options...
Harald Haukland Posted April 14, 2016 Share Posted April 14, 2016 beechcraft_model_18_volpar_package.zip In our Library. All you can do it try it for P3D. It works fine, but the props are dark, not transparent if you know what i mean, is there a fix for that, but it works just fine, fly's well on autopilot as erll, so yes it works good, def. a keepr this one. Thnx for the tip guys http://www.speedtest.net/result/4450194567.png Asus Z170-A-1151 - intel i7-6700K@4GHz - Asus ROG NVidia GTX 1050 TI Strix 4GB - 32GB HyperX DDR4@2400 MHz - Corsair CM750-750W - Corsair H80i v2 Watercooling Link to comment Share on other sites More sharing options...
Harald Haukland Posted April 14, 2016 Share Posted April 14, 2016 This is a wonderful flying airplane. I've had it for several years, and at one time it was all I flew. I did modify the panel somewhat to better suite my flying, nothing drastic, just more complete. [ATTACH=CONFIG]188532[/ATTACH] The panel modifications were done in 2010... //This Panel.cfg file created by CfgEdit // Built Tuesday, November 09, 2010 at 12:08 Build:15090. Cfgedit is a freeware product that remains available at some flightsim sites. It has been rumored not to work in FS2002, FS9, and FSX, but I have no difficulty with it and use it for all of my panel mods and my new. from scratch new panels. Great selection, Kenny! care to share your redesigned panel config with the rest of us? haha, just kidding, nice one, but it would be great if you did share.. :) http://www.speedtest.net/result/4450194567.png Asus Z170-A-1151 - intel i7-6700K@4GHz - Asus ROG NVidia GTX 1050 TI Strix 4GB - 32GB HyperX DDR4@2400 MHz - Corsair CM750-750W - Corsair H80i v2 Watercooling Link to comment Share on other sites More sharing options...
mrzippy Posted April 14, 2016 Share Posted April 14, 2016 It works fine, but the props are dark, not transparent if you know what i mean, is there a fix for that, but it works just fine, fly's well on autopilot as erll, so yes it works good, def. a keepr this one. Thnx for the tip guys fsx_beech_18_volpar_prop_texture_and_engine_smoke.zip Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
Kdierken Posted April 14, 2016 Author Share Posted April 14, 2016 mrzippy, thanks for giving a fix for all simmers that wants this A/C in their hanger. Does this zip work on FS9 as that is what I fly? I am glad that you simmers out there like this plane as it is a nice one. Kenny Link to comment Share on other sites More sharing options...
Harald Haukland Posted April 14, 2016 Share Posted April 14, 2016 fsx_beech_18_volpar_prop_texture_and_engine_smoke.zip No Search Results No Files matched your search criteria. Sorry, cant find any files with that name. Dont exsist at all, oh well, i can live with that dark prop that is not transparent at all, small defect i can live with, thnx anyway http://www.speedtest.net/result/4450194567.png Asus Z170-A-1151 - intel i7-6700K@4GHz - Asus ROG NVidia GTX 1050 TI Strix 4GB - 32GB HyperX DDR4@2400 MHz - Corsair CM750-750W - Corsair H80i v2 Watercooling Link to comment Share on other sites More sharing options...
mrzippy Posted April 15, 2016 Share Posted April 15, 2016 No Search Results No Files matched your search criteria. Sorry, cant find any files with that name. Dont exsist at all, oh well, i can live with that dark prop that is not transparent at all, small defect i can live with, thnx anyway FS2004 (ACOF) - FS2004 Jetliners FSX Volpar Prop Texture [ Download | View ] Name: fsx_beech_18_volpar_prop_texture_and_engine_smoke.zip Size: 75,431 Date: 12-26-2010 Downloads: 358 FSX Volpar Prop Texture. SP2 compatible prop texture and engine smoke effect for the Brian Gladden FS2004 Volpar modified Beech 18 when used in FSX, (VOLPAR.ZIP). Easy installation. By Tom Tiedman. Still thinking about a new flightsim only computer! Link to comment Share on other sites More sharing options...
KCD Posted April 15, 2016 Share Posted April 15, 2016 Kenny... Sorry if I confused you by showing my panel. That creation is not available on-line, or anywhere else. It was created by me because the stock panel fell short of my expectations for what a panel should be for the aircraft type. I improved it to suit my needs. Unfortunately, I cannot make it available on-line because there are propriatory gauges used from panels by professional developers. Without permission, I cannot post the panel, and I no longer know whose instruments I use in any of my panels; I just have a huge file full of gauges from everywhere imaginable that I draw from. The panel should be easily reproduced, however, All you need is the original BMP file that came with your download as a starting point. If you want to undertake the project, I can send you a list of the gauges I used, their size, and placelemt. Your finished product, depending on the actual gauges you substitute for the ones I used, will look and act very much like the one I showed earlier in the thread. Link to comment Share on other sites More sharing options...
Kdierken Posted April 15, 2016 Author Share Posted April 15, 2016 Thanks KCD, I understand much appreciated anyways. I still like the panel that came with it. Kenny Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.