34176 Posted November 25, 2014 Share Posted November 25, 2014 Hi all, I am using a Saitek radio panel on the FSX Cessna 172SP. On initial load I can switch to the XPDR position and it displays 1200. As I begin to rotate the dial to change the transponder freq, the numbers begin to change and then the display goes black forever. Saitek diagnostics show panel is functioning correctly. Tried SPAD driver, but did not fix problem. Aircraft cfg file and flt file appears to have proper settings. Any ideas are welcome. 34176 Link to comment Share on other sites More sharing options...
rickharrisbr Posted December 11, 2014 Share Posted December 11, 2014 Exactly the same problem here with Radio Panel and FSX. No correct display of DME and XPDR. Any hint? Thanks Link to comment Share on other sites More sharing options...
snowlion Posted December 24, 2014 Share Posted December 24, 2014 I also have this issue; anyone get a resolution? Link to comment Share on other sites More sharing options...
piesal Posted December 31, 2014 Share Posted December 31, 2014 My Saitek radio panel only on the transponder position the display goes black, while the rotation knobs are able to change the squawk on the fsx panel. I have two radio panels, but it's the same for both. Link to comment Share on other sites More sharing options...
34176 Posted January 18, 2015 Author Share Posted January 18, 2015 My Saitek radio panel only on the transponder position the display goes black, while the rotation knobs are able to change the squawk on the fsx panel. I have two radio panels, but it's the same for both. Submitted a ticket to saitek (2nd one). So far they have asked me to try things I have already tried. If they fix it I'll let you know. Link to comment Share on other sites More sharing options...
NavidH Posted January 18, 2015 Share Posted January 18, 2015 Does the panels get enough power? Using USB hub? Link to comment Share on other sites More sharing options...
dejavu1953 Posted February 21, 2015 Share Posted February 21, 2015 Hello all, I think i have found the solution, i have before the same problem like all, what i did is back to old Driver in this case 6.6.6.3 and now everthing is ok. My problem start when few days i buy the saitek multipanel and install the latest drivers from saitek. I have try diferent things to have my transponder working again and no results finaly i think "way not" try a older driver and... is working everthing radio panel and multi panel :) For lucky i have keep my older driver, let me know if you guys fix your problem to regards Link to comment Share on other sites More sharing options...
deansalman Posted June 29, 2017 Share Posted June 29, 2017 with the new drivers DME 1 is ok but DME 2 is crazy. did the old drivers fix that Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.