Results 1 to 5 of 5

Thread: Taxi problems

  1. Default Taxi problems

    Sometimes when I taxi with my B737 with moderate speed I suddenly lose my front wheel and my nose dips into the ground, or I totally crash with no obvious reason. Has anybody seen something like that? Thanks.

  2. #2
    Join Date
    Mar 2005
    Location
    Auckland, New Zealand.
    Posts
    826

    Default RE: Taxi problems

    Sounds like a scenery layering problem - you may be hitting 'invisible' scenery that you cannot see but FS thinks is there. Does it always happen at a specific airport, or area? Have you installed any new scenery? If you have, disable it through the scenery library then try again. If the problem is fixed, then you know it is new scenery.

    Let me know how you go,

    Chris

  3. #3
    Join Date
    Mar 2005
    Location
    Oro Valley, Arizona, USA.
    Posts
    3,199

    Default RE: Taxi problems

    Which 737?

  4. #4

    Default RE: Taxi problems

    For the default 737's changing the 'Impact Damage Threshold' value from 1181.1 to 1581.1, or 1800.0 (?) should 'fix' this problem. Here's my mods, which includes placing wheels on the ground (ie: not floating), and amount of compression for them, too.
    //0 Class <0=none,1=wheel, 2=scrape, 3=float>
    //1 Longitudinal Position (feet)
    //2 Lateral Position (feet)
    //3 Vertical Position (feet)
    //4 Impact Damage Threshold (Feet Per Minute)
    //5 Brake Map (0=None, 1=Left, 2=Right)
    //6 Wheel Radius (feet)
    //7 Steer Angle (degrees)
    //8 Static Compression (feet) (0 if rigid)
    //9 Max/Static Compression Ratio
    //10 Damping Ratio (0=Undamped, 1=Critically Damped)
    //11 Extension Time (seconds)
    //12 Retraction Time (seconds)
    //13 Sound Type
    //14 Airspeed limit for retraction (KIAS)
    //15 Airspeed that gear gets damage at (KIAS)

    (contact_points) //Note: change parentheses to brackets!!
    point.0=1, 40.00, 0.00,-8.20, 1581.1, 0, 1.442, 55.92, 0.3, 2.5, 0.9, 4.0, 4.0, 0, 220.0, 250.0 //ORIG p3=-8.40,p4=1181.1,p8=0.6,
    point.1=1, -7.75,-8.58,-8.50, 1574.8, 1, 1.442, 0.00, 0.7, 2.5, 0.9, 6.9, 6.9, 2, 220.0, 250.0 //ORIG p3=-8.60,p8=1.0,
    point.2=1, -7.75, 8.58,-8.50, 1574.8, 2, 1.442, 0.00, 0.7, 2.5, 0.9, 7.1, 7.1, 3, 220.0, 250.0 //p3=-8.60p8=1.0,

    The values after '//' are the original values, before changes, just for reference. IF it's payware, or other model(s) than the change to 'Impact Damage Threshold' will still apply. Ignore the rest.
    Chuck
    PS: Make changes (notepad) and don't forget to 'Save' (not Save As). Notepad knows which cfg you are working on, so a simple 'Save' will do. Reload AC and go test it.

  5. Default RE: Taxi problems

    it happens to the downloaded: FFX/SGA Boeing 737-300 in Lufthansa "Hanau" livery.

    it also happens at certain locations at the airport with default scenery where the elevation seems to change. the ground "pops-up" a little, and thats when I get caught when I taxi to fast.

Similar Threads

  1. Problems using the Taxi Speed program
    By devitomd in forum FS2004
    Replies: 3
    Last Post: 08-13-2006, 09:56 PM
  2. Ford TriMotor taxi problems
    By bobanderson in forum FS2004
    Replies: 14
    Last Post: 01-02-2004, 03:51 PM
  3. taxi problems with AI aircraft
    By toocsquatch in forum FS2002
    Replies: 2
    Last Post: 12-15-2003, 09:51 AM
  4. Taxi speed problems in FS Maintenance?
    By rhomboidrelease in forum FS2002
    Replies: 4
    Last Post: 06-01-2002, 07:06 PM
  5. King Air Taxi problems
    By cdog420 in forum FS2002
    Replies: 8
    Last Post: 04-09-2002, 05:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •