PSS a320 Instability

[Sol72]

Hi,

I seem to be having problems when using the pss a320 panel.

If the auto-pilot is set at a given height and altitude the aircraft continually dives and recovers about it's set altitude. ie 20,000ft 280 kts no flaps etc.

Only seems to be when using the pss panel, other panels work fine on same aircraft.

Any ideas ??? shame a very good panel otherwise.

Gary

[Bruce]

which plane are you using, have you got the latest update and are you usin git in Fs2002 or FS9. i find it flys very well and stable with the PSS aircraft and all the latest files/updates.

[dfish]

Open up the main panel config. located at \aircraft\PSSABPRO\panel and make the following edit.

Background_color=16,16,16
size_mm=2,2 <--- this line reads 1,1 originally
position=7
visible=1
ident=59

gauge00=PSS-A320!Server, 0, 0, 1

That worked for me.

Dave Fisher
CYYZ

P4 2.8 GB 478P 533 MHZ CPU
P4P800S Asus Motherboard
512 DDR
Geforce Ti 4200/128
Maxtor 80 Gig ATA 133 HD

http://www.precisionmanuals.com/imag.../ng_driver.jpg

[timjohns]

Do you know the difference between pushing and pulling the knobs? It's not obvious unless you've read the manual. Pushing them lets the FCU take over, whilst pulling sets the inputs as per the thing on the glare shield. If the MCDU and this are different, it could cause your problem. I hope this is clear;)

[Sol72]

Hi,

Thanks now all working ok with the .cfg set to 2,2

The only crticism I have is the angle of the aircraft when you set a new bearing on the heading selector. Seems a little extreme and very different to other aircraft.

Otherwise an excellent panel.

Gary