TDS 777 Gateway attachment

I got a freeware qatar airways Skyspirit 777 300ER

The problem I got is that I cannot seem to get the jetways in the position of the main doors

I would like to know the coordinates for the main doors in the airplane

Any help would be fully appreciated :D

Cheers,

Prototypebayu8

TDS 777? I don't think so! Give the filename of the 777-300er that you have.

These are from the WOAI 777-300er. Might work as a starting point and may need fine tuning.

[exits]

number_of_exits = 2

exit.0 = 0.40, 65.00, -10.00, 7.00, 0

exit.1 = 0.40, -33.00, 9.50, -4.50, 1

Sorry guys I found out myself a good coordinate

Here it is :

[exits]

number_of_exits = 4

exit.0 = 0.1, 90.8, -10.8, 10.5, 0 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

exit.1 = 0.4, -146.0, 8.0, -7.5, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

exit.2 = 0.4, -42.30, 9.0, -7, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

exit.3 = 0.4, -42.30, 9.0, -7, 2 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

Sorry guys I found out myself a good coordinate

Here it is :

[exits]

number_of_exits = 4

exit.0 = 0.1, 90.8, -10.8, 10.5, 0 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

exit.1 = 0.4, -146.0, 8.0, -7.5, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

exit.2 = 0.4, -42.30, 9.0, -7, 1 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

exit.3 = 0.4, -42.30, 9.0, -7, 2 //openclose rate percent per second, longitudinal, lateral, vertical positions from datum (feet), type (0=Main 1=Cargo 2=Emergency)

TDS 777? I don't think so! Give the filename of the 777-300er that you have.

 

These are from the WOAI 777-300er. Might work as a starting point and may need fine tuning.

 

[exits]

number_of_exits = 2

exit.0 = 0.40, 65.00, -10.00, 7.00, 0

exit.1 = 0.40, -33.00, 9.50, -4.50, 1

Thx a lot I found out the coordinates myself, Now I would like to know the gate coordinates for the POSKY 777 200LR

Heres the link:

http://cdn.poskyarchive.com/777-200/Liveries/Qatar%20Airways%20777-2DZ-LR.zip

Help would be appreciated

Thanks !!

PrototypeBayu8