xrtc Posted February 10, 2015 Share Posted February 10, 2015 Good day people! Well, i've been experiencing an issue with osp_atr 42 300 model in FS2004. Its an ai model which i edited to be flyable...so the issue is that the aircraft while parked it is in a position like "taking off"....nose is fully up...why is this happening? Link to comment Share on other sites More sharing options...
hjwalter Posted February 11, 2015 Share Posted February 11, 2015 Your Center of Gravity is behind your longitudinal main gear position. Link to comment Share on other sites More sharing options...
napamule2 Posted February 12, 2015 Share Posted February 12, 2015 Well, it was the fuel tanks being too far back (ie: -39.000, where they s/b 0.100). Here are FDE edits you need. With these tweaks it flys better than some payware (hehe). I did not 'fix' the auto throttle (yet). OSP ATR 42-300 Base Pack V 1.0 for FS2004, by Oskari Syynimaa (2009) ---------------------------------------------------------------------------------------------------------- Air: section 310=0 //o=2 --------------------------------------- aircraft config: (add missing): ----------------------------------------- title=OSP ATR 42-200 House Livery panel= sound= C208 sound [pitot_static] //Increasing this value= more instantaneous reaction in the VSI vertical_speed_time_constant= 20 pitot_heat=1.000 [Fuel] LeftMain= 0.100, -9.100, 3.900, 417.500, 0.000 RightMain= 0.100, 9.100, 3.900, 417.500, 0.000 fuel_type= 2 number_of_tank_selectors= 1 electric_pump= 1 [GeneralEngineData] engine_type= 5 Engine.0= 6.000, -8.800, 2.000 Engine.1= 6.000, 8.800, 2.000 fuel_flow_scalar= 1.0 min_throttle_limit= -0.12 [Propeller] thrust_scalar= 1.3 [Turboprop_engine] power_scalar= 1.3 [Airplane_Geometry] htail_incidence= -0.050 [Radios] // Radio Type = availiable, standby frequency, has glide slope Audio.1= 1 Com.1= 1, 1 Com.2= 1, 1 Nav.1= 1, 1, 1 Nav.2= 1, 1, 0 Adf.1= 1 Transponder.1= 1 Marker.1= 1 [vacuum_system] //For 3rd party panels.. max_pressure=5.150 vacuum_type=2 electric_backup_pressure=0.000 engine_map=1,1,0,0 [deice_system] structural_deice_type=1 [GPWS] //Diables 'don't sink', 'too low-flaps', etc call outs. //Courtesy of, and thanks to, Rob Barendgret). max_warning_height = 0 sink_rate_fpm = -9999 excessive_sink_rate_fpm = -9999 climbout_sink_rate_fpm = -9999 flap_and_gear_sink_rate_fpm= -9999 Chuck B Napamule i7 2600K @ 3.4 Ghz (Turbo-Boost to 3.877 Ghz), Asus P8H67 Pro, Super Talent 8 Gb DDR3/1333 Dual Channel, XFX Radeon R7-360B 2Gb DDR5, Corsair 650 W PSU, Dell 23 in (2048x1152), Windows7 Pro 64 bit, MS Sidewinder Precision 2 Joy, Logitech K-360 wireless KB & Mouse, Targus PAUK10U USB Keypad for Throttle (F1 to F4)/Spoiler/Tailhook/Wing Fold/Pitch Trim/Parking Brake/Snap to 2D Panel/View Change. Installed on 250 Gb (D:). FS9 and FSX Acceleration (locked at 30 FPS). Link to comment Share on other sites More sharing options...
yerameyahu Posted June 30, 2015 Share Posted June 30, 2015 Hi! sorry I 'm french , How you modified your plane to make him(it) flyable? Sorry, my english must be wrong. Thanks a lot! Link to comment Share on other sites More sharing options...
hjwalter Posted July 1, 2015 Share Posted July 1, 2015 There are many very good flyable ATR aircraft in the library, some even including cockpits, sounds and everything else needed to fly it. Why then go through all the trouble and problems to make an AI version flyable ? Hans Link to comment Share on other sites More sharing options...
yerameyahu Posted July 1, 2015 Share Posted July 1, 2015 But i don't found the HOP for Airfrance livery for an ATR 42... I've the Air France but not the Hop... Thanks for your help Link to comment Share on other sites More sharing options...
napamule2 Posted July 2, 2015 Share Posted July 2, 2015 Wow, you haven't got that ATR flying yet (ie: Feb 2015=orig post date). Well, you double click the aircraft.cfg in main folder. It will open by/in NOTEPAD (do not use Word). Then you EDIT (ie: change the numbers). The 'main' problem is the gas tanks being too far back (ie: -39.000). Change the -39.000 to -0.100 (overwrite, or delete then enter number by keying numbers with top number keys). Then go 'File', then 'Save' and then 'X' out of notepad and you are done. Go try it. Not hard. Chuck B Napamule i7 2600K @ 3.4 Ghz (Turbo-Boost to 3.877 Ghz), Asus P8H67 Pro, Super Talent 8 Gb DDR3/1333 Dual Channel, XFX Radeon R7-360B 2Gb DDR5, Corsair 650 W PSU, Dell 23 in (2048x1152), Windows7 Pro 64 bit, MS Sidewinder Precision 2 Joy, Logitech K-360 wireless KB & Mouse, Targus PAUK10U USB Keypad for Throttle (F1 to F4)/Spoiler/Tailhook/Wing Fold/Pitch Trim/Parking Brake/Snap to 2D Panel/View Change. Installed on 250 Gb (D:). FS9 and FSX Acceleration (locked at 30 FPS). Link to comment Share on other sites More sharing options...
yerameyahu Posted July 2, 2015 Share Posted July 2, 2015 In Moments of inertia i've : ";Moments of Inertia empty_weight_pitch_MOI= 300000 empty_weight_roll_MOI= 502000 empty_weight_yaw_MOI= 505000 empty_weight_coupled_MOI= 0.0" I don't understand what I need to do And what I have to do to that appears in the aircraft selection menu ? (The OSP ATR) Thank you ! Link to comment Share on other sites More sharing options...
PhantomTweak Posted July 2, 2015 Share Posted July 2, 2015 Look in the FSX\SimObjects\Airplanes folder for the folder containing the aircraft that's giving you trouble. Edit the aircraft.cfg file in that folder with Notepad. Scan down through it to the section that starts with [fuel], thus: [fuel] LeftAux = -29.6, 0.0, 0.5, 418, 0.0 ;Tank 1 //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) There will be more lines to it, that's just an example. Napamule want's you to change the first number after the = sign. And what I have to do to that appears in the aircraft selection menu ? (The OSP ATR) you don't need to do anything there. it's not relevant to this discussion. Hope that helps a little... Pat☺ [sIGPIC][/sIGPIC] Had a thought...then there was the smell of something burning, and sparks, and then a big fire, and then the lights went out! I guess I better not do that again! Sgt, USMC, 10 years proud service, Inactive reserve now :D Link to comment Share on other sites More sharing options...
copperpen Posted July 2, 2015 Share Posted July 2, 2015 Look in the FSX\SimObjects\Airplanes folder FS9/Aircraft is the correct location for FS9 Link to comment Share on other sites More sharing options...
yerameyahu Posted July 2, 2015 Share Posted July 2, 2015 Ok,thanks but my first problem is that : I Would Like That the ATR appears in the selection screen for flying it thanks Link to comment Share on other sites More sharing options...
yerameyahu Posted July 2, 2015 Share Posted July 2, 2015 Thanks for all but i have decided to repaint my ISDT ATR 42 aircraft in HOP for Airfrance livery. It's much easy Thanks people Link to comment Share on other sites More sharing options...
xrtc Posted November 6, 2016 Author Share Posted November 6, 2016 A very very big THANK YOU to everyone... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.