Posky CRJ700 Floating Nose Gear

Okay so I finally managed to get hold of the Posky CRJ 700 with a vc, but the nose gear is floating on the runway, does anyone have any fixes or solutions please?

These are the contact points found within the aircraft.cfg file?

[contact_points]

static_pitch = -2.75

static_cg_height = 4.25

tailwheel_lock = 0

gear_system_type = 1

max_number_of_points = 7

point.0 = 1, 2.6667, 0, -4.9, 16000, 0, 0.9, 70, 0.45, 1, 0.55, 9, 10, 0, 250, 280

point.1 = 1, -46.22, -7.3899, -6.68, 4000, 1, 1.5, 0, 0.8, 1.5, 1.5, 13, 15, 2, 250, 280

point.2 = 1, -46.22, 7.39, -6.68, 4000, 2, 1.5, 0, 0.8, 1.5, 1.5, 13, 15, 3, 250, 280

point.3 = 2, -54, -37.22, 1, 787.4, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0

point.4 = 2, -54, 37.22, 1, 787.4, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0

point.5 = 2, -77.29, 0, 1, 787.4, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0

point.6 = 2, -15, 0, -1, 787.4, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0

point.0 = 1, 2.6667, 0, -4.9 is the vertical adjustment. Because it is referenced to the model's 0,0,0 point making it more positive(-4.0) should lower the nose. It will probably take a few edits to get it just right...Don

LOL! Got distracted in the middle of replying. -4.0 was a good guess, eh?

My contact points are completely different:

[contact_points]
point.0=1,  -8.50,  0.00,  -6.70, 1600, 0, 0.5625, 46.8, 0.80, 2.5, 0.55, 10.0, 10.0, 0, 260.0, 260.0
point.1=1, -56.50, -6.76,  -8.60, 1600, 1, 1.0,     0.0, 0.90, 2.5, 0.65,  9.0,  9.0, 2, 260.0, 260.0
point.2=1, -56.50,  6.76,  -8.60, 1600, 2, 1.0,     0.0, 0.90, 2.5, 0.65,  9.0,  9.0, 3, 260.0, 260.0
point.3=2, -65.00, -39.00,  0.00, 1000, 0, 0.000,  0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 5, 0.0, 0.0
point.4=2, -65.00,  39.00,  0.00, 1000, 0, 0.000,  0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 6, 0.0, 0.0
point.5=2, -43.00,   0.00, -3.80, 1000, 0, 0.000,  0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 9, 0.0, 0.0
point.6=2, -98.00,   0.00, 16.00, 1000, 0, 0.000,  0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 9, 0.0, 0.0
point.7=2,  -8.00,   0.00, -2.00, 1000, 0, 0.000,  0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 4, 0.0, 0.0
point.8=2, -80.00,   0.00, -1.50, 1000, 0, 0.000,  0.00, 0.0, 0.0, 0.0, 0.0, 0.0, 4, 0.0, 0.0

static_pitch = -1.8
static_cg_height = 7.3
gear_system_type=1           //Hydraulic
emergency_extension_type=2   //None=0,Pump=1,Gravity=2

They still could use some tweaking though as the rear wheels are somewhat "sunk" into the ground.

My contact points are completely different:...

 

They still could use some tweaking though as the rear wheels are somewhat "sunk" into the ground.

That's because yours is the default CRJ 700. The OP's is the POSKY bird...Don

Not sure how that happened as what I posted came out of the POSKY CRJ200 aircraft.cfg - or at least what I THOUGHT it was.

I'm guessing at one point I had the same issue as the OP, but don't remember ever swapping out the configs.

No matter, downloaded an actual POSKY aircraft.cfg now though. ;)

...what I posted came out of the POSKY CRJ200 aircraft.cfg - or at least what I THOUGHT it was.

Isn't this topic about the 700, not the 200?

That's because yours is the default CRJ 700. The OP's is the POSKY bird...Don

Not sure how that happened as what I posted came out of the POSKY CRJ200 aircraft.cfg - or at least what I THOUGHT it was.

 

I'm guessing at one point I had the same issue as the OP, but don't remember ever swapping out the configs.

 

No matter, downloaded an actual POSKY aircraft.cfg now though. ;)

It wouldn't be a first time that I found Posky planes aircraft.cfg having aircraft.cfg's that match other planes, some payware.

i am charlie

Isn't this topic about the 700, not the 200?

Yea, it's called a typo. :p