I have made a gearlamps gauge for the Noratlas plane. It works well as I
texted it and compared to the default 737 gear lamps.
The problem is that :
- when the aircraft is loaded, the 3 green lamps are ON (normal)
- when I take off and retract the gear, the green lamps switch Off (normal) and
the red lmps switch On during the gear movement (normal)
- when the gear is completely retracted and the doors closed , the nose red
lamp goes Off (normal) but not the 2 other ones (NOT normal).
- same problem when the gear goes out, the nose lights function OK, but not the
left and right lamps.
This was confirmed with the 737 lamps.
Can that be a model problem ?
Thanks for the help