310 gages problem

**sentra87** · 08-30-2003, 06:52 PM

Hi ever since i formated my hard drive. The gages on the 310 are coverd up now when i use it.

**Flying_Scott** · 08-30-2003, 07:05 PM

Uninstall, download the full wrapper file from flight1.com and reinstall using that.

***Lou_Betti*** · 08-31-2003, 09:29 AM

Also, never remove the Flight One Software folder from your C drive after instrallation, as that is where the license file and key file for your 310 are stored, and without the license file in place, you will experience exactly what you did. :-)

Regards,
[link:www.dreamfleet2000.com|http://www.dreamfleet2000.com/gfx/im...FORUM_LOU.gif]

**romeotango** · 08-31-2003, 11:09 AM

I too am experiencing something of the kind. The difference is that this only happens in the vc and only to the ASI. This happens only as the 310 is loaded and only if the vc loads first. My fix is quite simple, I switch to 2d cocpit and back. I have uninstalled and reinstalled and have the same problem. Strange thing is, I never had this problem till I removed FS2K from my system and formatted my C drive.

Robin.

**JohnBurgess** · 08-31-2003, 02:29 PM

Hi there,

I am finding that with the Cessna 310 the keystroke ctrl shift 2 (which I use as one of my keystrokes for 'Radar Contact')causes the altimeter to be covered. Is this intentional?

Other than this I am delighted with the plane. Thanks to all concerned.

Best Wishes,

John

**ToddNicholson** · 08-31-2003, 03:31 PM

Yes, this is intentional, but since it's obviously conflicting with another addon, you can change that key-command for the 310 using the Custom Keys in the 310 Config-O-Matic.

**JohnBurgess** · 08-31-2003, 03:37 PM

Hi Todd,

Thanks for the quick reply. I thought about that but there are no Custom Key settings in the 310 Config-O-Matic as far as I can see.

All the best,

John

**ToddNicholson** · 08-31-2003, 04:32 PM

Doh! You're right. Maybe you can change it through RC or FS?

**sentra87** · 08-31-2003, 08:54 PM

I did back up the key file and put all my flight one stuff on in the c drive. But i still get the same thing were do i put the key file.

**ToddNicholson** · 08-31-2003, 11:33 PM

They go in the FlightOne Software folder which should be located in the root directory of your harddrive (e.g. your "C" drive for most standard installations.)