assigning ATC to buttons on CH flight sim yoke

[florisfooij]

I posted the same message on the Fs2002 forum but since I didn't get an answer I thought I might give it a try over here.

What is the question? I would like to assign the atc options you get when opening the atc window to keys on my CH flight sim yoke. I tried it but failed to get it working. I am capable of assigning the 'ATC window open/close' to one of the keys.

Anyone?

I would appreciate the help. On final with left hand on the yoke and my right hand om the power (ch pro Throttle) I have no hand left to do the ATC......

Regards,

Floris.

[Lou_Betti]

It's a "no go". ;-)

We discussed doing just this with MS during the beta, but it was not practical for them to do. You can only open/close the ATC window.

Regards,
[link:www.dreamfleet2000.com|http://www.dreamfleet2000.com/gfx/im...FORUM_LOU.jpg]

[cablsurfin]

Read this, it might give you some ideas:

http://www.flightsim.com/dcforum/DCForumID3/4992.html#


Nick Anzelino

[w6ffc]

Go to the CH Products web site and download CHManager, it does what you are trying to do.. (assuming your yoke is USB)

Mike B.

[florisfooij]

Thanks for the help. I am/was a little hesitant with installing the 'CH control manager'. First of all because I have read a lot of posts describing problems with the control manager (and my controls i.e. USB yoke, pro throttle and pedals work fine without the manager)and second because I like to keep my computer system clean.
But...., since you seem to have good experiences with the control manager I'll give it a try.
Again, thanks a lot for the help. It is appreciated.

Floris.