Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: GeForce2 MX 400 Users Out there?

  1. #1
    tpietro Guest

    Default GeForce2 MX 400 Users Out there?

    Trying to find out whatdriver and tweaks you have done to FS2002.

    Tim




    My specs-
    Pentium 4 2.0 ghz
    768 RAM (memory)
    64 MB NVidia Geforce2 MX400 AGP w/ DVI
    40 GB Hard Drive

    Applications used w/ FS2002:
    FS2002 Pro
    Dreamfleet 737 (F2K2)
    Lago Scenery Enhancer (SP1)
    Ultimate Airlines w/ FSk2 (manually)


  2. #2
    tpietro Guest

    Default RE: GeForce2 MX 400 Users Out there?

    bump

  3. #3

    Default RE: GeForce2 MX 400 Users Out there?

    I am actually running 2 GeForce2 MX cards..

    One is an AGP
    The other is a PCI card.
    all in the same machine..

    Sliders are maxed except the water texture.
    ATC is set to 60% (anything over that and it get's too busy to reply back)

    Running AMD 1gig
    RAM 1.2gig (I know it's a waste, but it's kewl to have)
    everything else is standard equip...

  4. #4
    tpietro Guest

    Default RE: GeForce2 MX 400 Users Out there?

    MAre you seeing blurry textures?

    Driver?

    Tweaks?

    Tim

    y specs-
    Pentium 4 2.0 ghz
    768 RAM (memory)
    64 MB NVidia Geforce2 MX400 AGP w/ DVI
    40 GB Hard Drive

    Applications used w/ FS2002:
    FS2002 Pro
    Dreamfleet 737 (F2K2)
    Lago Scenery Enhancer (SP1)
    Ultimate Airlines w/ FSk2 (manually)


  5. #5

    Default RE: GeForce2 MX 400 Users Out there?

    No tweaks.
    Im not over clocking them. Still at default.
    Screen res. is 1024 x 768 on both monitors..
    can't tell you exactly what driver Ver. I am running since I am at work.. but I believe they are Ver 22.31 They are a few months old.. The only thing I had to make sure was that my VIA drivers were up to date.. Something to do with the AGP port driver with the VIA chipset... Other than that...

    Textures are not blury. Everything seems to work great..
    Getting FPS @ 10-15 in heavy scenery areas and hitting 20 FPS (where my slider is set) most of the time...

    Only problem I get and sounds like other too is that on the runway some of the sections seem to flash on and off sometimes.. Only when I am rolling down the runway though..

  6. Default RE: GeForce2 MX 400 Users Out there?

    Pentium II 400Mhz
    256K RAM
    PNY GeForce2 64K

    Have recently installed graphics card. Running 21.88 drivers.
    Have had NO blurry scenery and I have done no tweaks to the card (Why mess with considering the slow processor)
    Locked at 18 fps. Get 18+ fps under normal flight. Get anywhere from 10-14 fps around major airports.
    Have AI aircraft setting at around 30%
    All other sliders at mid - 2/3 settings.
    Water on detail only (no reflections).
    Never had a FS2k2 lockup. Have been REALLY happy!
    gwillmot

  7. #7
    tpietro Guest

    Default RE: GeForce2 MX 400 Users Out there?

    I've seen a lot about the VIA chip. I have a Pentium 4 and an Intel motherboard. Do I need the VIA driver?

    Tim


  8. #8
    tpietro Guest

    Default RE: GeForce2 MX 400 Users Out there?

    just making sure this is a 400 MX.


    Tim

    My specs-
    Pentium 4 2.0 ghz
    768 RAM (memory)
    64 MB NVidia Geforce2 MX400 AGP w/ DVI
    40 GB Hard Drive

    Applications used w/ FS2002:
    FS2002 Pro
    Dreamfleet 737 (F2K2)
    Lago Scenery Enhancer (SP1)
    Ultimate Airlines w/ FSk2 (manually)


  9. Default RE: GeForce2 MX 400 Users Out there?

    Sorry...It is a PNY GeForce2 MX 400 AGP
    gwillmot

  10. #10
    newsflyer Guest

    Default RE: GeForce2 MX 400 Users Out there?


    I'm using the visiontek card with mx400 AGP...and love it. And, I actually managed to tweak it with the geforce tweaker from www.3dguru.com. I can't tell you exactly what I did, because I am at work, but the results were stunning, to say the least. I am using Denney's mesh and Lennart's textures as well as assorted scenery add ons. There is virtually no blurred images.

    I'm using a TYAN 1854 Trinity 1 gig mobo plus 256 megs of ram and a SB 128PCI sound card. I could not be happier...

    Sherman Kaplan
    Highland Park IL


Similar Threads

  1. NVidia GeForce2
    By jdl571 in forum FS2002
    Replies: 7
    Last Post: 07-03-2002, 05:48 PM
  2. Replies: 1
    Last Post: 03-05-2002, 03:40 PM
  3. Replies: 9
    Last Post: 01-10-2002, 10:37 AM
  4. For all FS2002 Beta Testers and GeForce2 400 Users
    By tpietro in forum DreamFleet General Discussion Forum
    Replies: 7
    Last Post: 01-10-2002, 05:48 AM
  5. Is GeForce2 GTS enough...
    By mmniemi in forum The Outer Marker
    Replies: 3
    Last Post: 11-01-2001, 01:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •